Photocouplers Infrared LED & Photo Triac
TLP3052A,TLP3052AF
TLP3052A,TLP3052AF
1. Applications
• Solid-State Relays
• Triac Drivers
• Home Electric Appliances
• Office Equipment
2. General
The TLP3052A consists of a non zero crossing photo triac, optically coupled to an infrared LED. The TLP3052A
is housed in the DIP6 package and guarantees insulation thickness of 0.4 mm (min). Therefore, the TLP3052A
meets the reinforced insulation class requirements of international safety standards.
3. Features
(1) Halogen-free
For details, see "Devices in Halogen-Free Resin Packages" at the end of this datasheet.
(2) Peak off-state voltage: 600 V (min)
(3) Non zero crossing functionary (NZC)
(4) Trigger LED current: 10 mA (max)
(5) On-state current: 100 mA (max)
(6) Isolation voltage: 5000 Vrms (min)
(7) Safety standards
UL-recognized: UL 1577, File No.E67349
cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349
VDE-approved: EN 60747-5-5, EN 62368-1 (Note 1)
CQC-approved: GB4943.1, GB8898 Japan Factory
Note 1: When a VDE approved type is needed, please designate the Option (D4).
Table 3.1 Mechanical Parameters
Characteristics
Creepage distances
Clearance distances
Internal isolation thickness
7.62 mm Pitch
TLP3052A
7.0 (min)
7.0 (min)
0.4 (min)
10.16 mm Pitch
TLP3052AF
Unit
8.0 (min)
mm
8.0 (min)
0.4 (min)
©2016-2020
1
Toshiba Electronic Devices & Storage Corporation
Start of commercial production
2015-08
2020-10-22
Rev.7.0