Photocouplers Photorelay
TLP3127
TLP3127
1. Applications
• High-Speed Memory Testers
• High-Speed Logic IC Testers
• Factory Automation (FA)
• Power supplies
• Mechanical relay replacements
2. General
The TLP3127 photorelay consists of a photo MOSFET optically coupled to an infrared LED. It is housed in a 4-
pin package with 2.54-mm lead pitch and 2.1-mm height. The TLP3127 is a bi-directional switch, which can
replace mechanical relays in many applications. And its high on-state current maximum rating and low on-state
resistance is suitable to control a power line.
3. Features
(1) Package: SOP(2.54SOP4) (Height 2.1 mm, pitch 2.54 mm)
(2) Normally opened (1-Form-A)
(3) OFF-state output terminal voltage: 60 V (min)
(4) Trigger LED current: 3 mA (max)
(5) ON-state current: 1.7 A (max) (Ta = 25 ), 1.3 A (max) (Ta = 50 )
(6) ON-state resistance: 0.13 Ω (max)
(7) Off-state capacitance: 250 pF (typ.)
(8) Off-state current: 10 nA (max)
(9) Isolation voltage: 1500 Vrms (min)
(10) Safety standards
UL-recognized: UL 1577, File No.E67349
cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349
4. Packaging and Pin Assignment
11-5H1S
©2017-2020
Toshiba Electronic Devices & Storage Corporation
1
1: Anode
2: Cathode
3: Drain
4: Drain
Start of commercial production
2014-11
2020-02-07
Rev.3.0