5. Internal Circuit
TLP3407SRL
6. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25 �)
Characteristics
Symbol Note
Rating
Unit
LED Applied input forward voltage
VIN
3
V
Input reverse voltage
VR
6
Input power dissipation
Input power dissipation derating
Junction temperature
(Ta ≥ 25 �)
PD
∆PD/∆Ta
Tj
50
mW
-0.5
mW/�
125
�
Detector OFF-state output terminal voltage
VOFF
60
V
ON-state current
ON-state current derating
(Ta ≥ 25 �)
ION
∆ION/∆Ta
1
A
-10
mA/�
ON-state current (pulsed)
(t = 100 ms, Duty = 1/10)
IONP
3
A
Output power dissipation
Output power dissipation derating
Junction temperature
Common Storage temperature
(Ta ≥ 25 �)
PO
∆PO/∆Ta
Tj
Tstg
240
-2.4
125
-40 to 125
mW
mW/�
�
�
Operating temperature
Topr
-40 to 110
Lead soldering temperature
Isolation voltage
(10 s)
Tsol
260
AC, 60 s, R.H. ≤ 60 %
BVS
(Note 1)
500
Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: This device is considered as a two-terminal device: Pins 1 and 2 are shorted together, and pins 3 and 4 are
shorted together.
Note: This device is sensitive to electrostatic discharge (ESD). Extreme ESD conditions should be guarded against
by using proper antistatic precautions for the worktable, operator, solder iron, soldering equipment and so on.
7. Recommended Operating Conditions (Note)
Characteristics
Symbol Note Min Typ. Max Unit
Supply voltage
Applied input forward voltage
ON-state current
Operating temperature
VDD
�
�
48
V
VIN
�
1.8
3
V
ION
�
�
1
A
Topr
-20
�
100
�
Note: The recommended operating conditions are given as a design guide necessary to obtain the intended
performance of the device. Each parameter is an independent value. When creating a system design using
this device, the electrical characteristics specified in this data sheet should also be considered.
©2018-2020
2
Toshiba Electronic Devices & Storage Corporation
2020-10-29
Rev.4.0