TLP350HF Datasheet | Toshiba

Features (1) Buffer logic type (totem pole output) (2) Output peak current: ±2.5 A (max) (3) Operating temperature: -40 to 125  (4) Supply current: 3 m A (max) (5) Supply voltage: 15 to 30 V (6) Threshold input current: 5 m A (max) (7) Propagation delay time: 500 ns (max) (8) mon-mode transient immunity: ±20 k V/µs (min) (9) Isolation voltage: 3750 Vrms (min) (10) Safety standards UL-approved: UL1577, File No.E67349 c UL-approved: CSA ponent Acceptance Service No.5A File No.E67349 VDE-approved: EN60747-5-5, EN60065 or EN60950-1 (Note 1) CQC-approved: GB4943.1, GB8898 Japan Factory Note 1: When a VDE approved type is needed, please designate the Option (D4). ©2016 Toshiba Corporation Start of mercial production 2011-08 2016-04-18 Rev.8.0 4. Packaging (Note) TLP350H TLP350H(LF1,TP1) TLP350H,TLP350HF TLP350H(LF5,TP5) 11-10C4S 11-10C401S TLP350HF(LF4,TP4) 11-10C405S 11-10C402S 11-10C404S Note: Through-hole type: TLP350H, TLP350HF Lead forming option: (LF1), (LF4), (LF5) Taping option: (TP1), (TP4), (TP5) 5. Pin Assignment 1: N.C. 2: Anode 3: Cathode 4: N.C. 5: GND 6: VO (Output) 7: N.C. 8: VCC ©2016 Toshiba Corporation 2016-04-18 Rev.8.0 6. Internal Circuit (Note) TLP350H,TLP350HF Note: A 0.1-µF bypass capacitor must be connected between pin 8 and pin 5. 7. Principle of Operation 7.1. Truth Table Input H L LED ON OFF M1 ON OFF M2 OFF ON Output H L 7.2. Mechanical Parameters Characteristics Creepage distances Clearance distances Internal isolation thickness 7.62 mm Pitch TLP350H 7.0 (min) 7.0 (min) 0.4 (min) 10.16 mm Pitch...