Photocouplers Photorelay
TLP3547,TLP3547F
TLP3547,TLP3547F
1. Applications
• Mechanical relay replacements
• Factory Automation (FA)
• Programmable Logic Controllers (PLCs)
• Measuring Instruments
• ATE (Automatic Test Equipment)
2. General
The TLP3547 and TLP3547F photorelay consist of a photo MOSFET optically coupled to an infrared LED. It is
housed in a 8-pin DIP package. The low ON-state resistance and the high permissible ON-state current of the
TLP3547 and TLP3547F make it suitable for power line control applications.
3. Features
(1) Normally opened (1-Form-A)
(2) OFF-state output terminal voltage: 60 V (min)
(3) Trigger LED current: 5.0 mA (max)
(4) ON-state current: 5 A (max) (A connection)
(5) ON-state resistance: 50 mΩ (max) (A connection)
(6) Isolation voltage: 2500 Vrms (min)
(7) Safety standards
UL-recognized: UL 1577, File No.E67349
cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349
UL-recognized: UL 508, File No.E499232 (Note 1)
VDE-approved: EN 60747-5-5 (Note 2)
Note 1: Please refer Absolute Maximum Ratings (UL-recognized UL 508) for UL 508 products.
Note 2: When a VDE approved type is needed, please designate the Option (D4).
4. Mechanical Parameters
Characteristics
Creepage distances
Clearance distances
Internal isolation thickness
7.62-mm Pitch
TLP3547
7.0 (min)
7.0 (min)
0.4 (min)
10.16-mm Pitch
TLP3547F
Unit
8.0 (min)
mm
8.0 (min)
0.4 (min)
©2016-2020
Toshiba Electronic Devices & Storage Corporation
1
Start of commercial production
2016-05
2020-03-25
Rev.6.0