Datasheet4U Logo Datasheet4U.com

TLP3548 - Photocouplers Photorelay

Key Features

  • (1) Normally opened (1-Form-A) (2) OFF-state output terminal voltage: 400 V (min) (3) Trigger LED current: 1 mA (max) (4) ON-state current: 0.4 A (max) (A connection) (5) ON-state resistance: 5 Ω (max) (A connection) (6) Isolation voltage: 2500 Vrms (min) (7) Safety standards UL-recognized: UL 1577, File No. E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No. E67349 UL-recognized: UL 508, File No. E499232 (Note 1) VDE-approved: EN 60747-5-5 (Note 2) Note 1: Please refer Absolute.

📥 Download Datasheet

Datasheet Details

Part number TLP3548
Manufacturer Toshiba
File Size 638.80 KB
Description Photocouplers Photorelay
Datasheet download datasheet TLP3548 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TLP3540 Photocoupler Toshiba Semiconductor
TLP350 Photocouplers Toshiba Semiconductor
TLP3502 Photocoupler Toshiba Semiconductor
TLP3502A Photocoupler Toshiba Semiconductor
TLP3503 Photocoupler Toshiba Semiconductor

Other Datasheets by Toshiba

Part Number Description
TLP3548F Photocouplers Photorelay
TLP3542 Photocoupler Photorelay
TLP3543 Photocoupler Photorelay
TLP3543A Photocouplers Photorelay
TLP3543AF Photocouplers Photorelay

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Photocouplers Photorelay TLP3548,TLP3548F TLP3548,TLP3548F 1. Applications • Mechanical relay replacements • Factory Automation (FA) • Programmable Logic Controllers (PLCs) • Measuring Instruments • ATE (Automatic Test Equipment) 2. General The TLP3548 and TLP3548F photorelay consist of a photo MOSFET optically coupled to an infrared LED. It is housed in a 8-pin DIP package. The low ON-state resistance and the high permissible ON-state current of the TLP3548 and TLP3548F make it suitable for power line control applications. 3. Features (1) Normally opened (1-Form-A) (2) OFF-state output terminal voltage: 400 V (min) (3) Trigger LED current: 1 mA (max) (4) ON-state current: 0.