TLP700H
TLP700H is Photocoupler manufactured by Toshiba.
Features
(1) Buffer logic type (totem pole output) (2) Output peak current: ±2.5 A (max) (3) Operating temperature: -40 to 125 (4) Supply current: 3 m A (max) (5) Supply voltage: 15 to 30 V (6) Threshold input current: 5 m A (max) (7) Propagation delay time: 500 ns (max) (8) mon-mode transient immunity: ±20 k V/µs (min) (9) Isolation voltage: 5000 Vrms (min) (10) Safety standards
UL-recognized: UL 1577, File No.E67349 c UL-recognized: CSA ponent Acceptance Service No.5A File No.E67349 VDE-approved: EN 60747-5-5, EN 62368-1 (Note 1) Note 1: When a VDE approved type is needed, please designate the Option (D4).
©2015-2020 Toshiba Electronic Devices & Storage Corporation
Start of mercial production
2011-05
2020-02-17 Rev.7.0
4. Packaging and Pin Configuration
11-5J1S
5. Internal Circuit (Note)
1: Anode 2: N.C. 3: Cathode 4: GND 5: VO (Output) 6: VCC
Note: A 0.1-µF bypass capacitor must be connected between pin 6 and pin 4.
6. Principle of Operation 6.1. Truth Table
Input H L
LED ON OFF
M1 ON OFF
M2 OFF ON
Output H L
6.2. Mechanical Parameters
Characteristics
Creepage distances Clearance distances Internal isolation thickness
7.62 mm Pitch TLP700H 7.0 (min) 7.0 (min) 0.4 (min)
10.16 mm Pitch TLP700HF
Unit
8.0 (min) mm
8.0 (min)
0.4 (min)
©2015-2020 Toshiba Electronic Devices & Storage Corporation
2020-02-17 Rev.7.0
7. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25 )
Characteristics
Symbol Note
Rating
Unit
LED Input forward current
20 m A
Input forward current...
