TLP701H
TLP701H is Photocoupler manufactured by Toshiba.
Features
(1) Output peak current: ±0.6 A (max) (2) Operating temperature: -40 to 125 (3) Supply current: 2 m A (max) (4) Supply voltage: 10 to 30 V (5) Threshold input current: 5 m A (max) (6) Propagation delay time: 700 ns (max) (7) mon-mode transient immunity: ±20 k V/µs (min) (8) Isolation voltage: 5000 Vrms (min) (9) Safety standards
UL-recognized: UL 1577, File No.E67349 c UL-recognized: CSA ponent Acceptance Service No.5A File No.E67349 VDE-approved: EN 60747-5-5, EN 62368-1 (Note 1) Note 1: When a VDE approved type is needed, please designate the Option (D4).
©2015-2020 Toshiba Electronic Devices & Storage Corporation
Start of mercial production
2010-04
2020-02-17 Rev.7.0
4. Packaging and Pin Configuration
11-5J1S
5. Internal Circuit (Note)
1: Anode 2: N.C. 3: Cathode 4: GND 5: VO (Output) 6: VCC
Note: A 0.1-µF bypass capacitor must be connected between pin 6 and pin 4.
6. Principle of Operation 6.1. Truth Table
Input H L
LED ON OFF
M1 ON OFF
M2 OFF ON
Output H L
6.2. Mechanical Parameters
Characteristics
Creepage distances Clearance distances Internal isolation thickness
7.62-mm Pitch TLP701H 7.0 (min) 7.0 (min) 0.4 (min)
10.16-mm Pitch TLP701HF
Unit
8.0 (min) mm
8.0 (min)
0.4 (min)
©2015-2020 Toshiba Electronic Devices & Storage Corporation
2020-02-17 Rev.7.0
7. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25 )
Characteristics
Symbol Note
Rating
Unit
LED Input forward current
Input forward current derating
Peak transient input forward current
(Ta ≥ 110...
