900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Toshiba Electronic Components Datasheet

TLP708F Datasheet

Photocoupler

No Preview Available !

TOSHIBA PHOTOCOUPLER LED & PHOTO-IC
TLP708 / TLP708F
TLP708, TLP708F
Factory Automation (FA)
Home Electrical Appliances
Operates at high ambient temperature up to 125°C
TLP708
4.58±0.25
654
Unit: mm
The Toshiba TLP708 consists of an infrared emitting diode and an integrated high-
gain, high-speed photodetector. The TLP708 is housed in the SDIP6 package.
Compared to the standard DIP8 package, TLP708 is smaller in size, yet comes with
international safety standards under a reinforced isolation category. As such, it is
possible to reduce the mounting footprint for applications that require certifications for
safety standards.
The photodetector has an open-collector output stage, and an internal Faraday shield
that provides a guaranteed common-mode transient immunity of ±15 kV/μs. As
TLP708 is also able to operate up to 125, it is suitable for use in applications like
industrial equipments where it is necessary to operate under high ambient
temperature.
TLP708F is of a long creepage distance and clearance distance type.
Input threshold current :
IFHL = 5mA (max)
Switching time (tpHL/tpLH):
Data transfer rate:
75ns (max)
15 MBd (typ.)
Guaranteed Performance over temperature: -40 to 125
Power supply voltage:
4.5 to 5.5 V
Common mode transient immunity:
±15 kV /μs (min)
Isolation voltage:
5000 Vrms (min)
Construction mechanical rating
Creepage distance
Clearance distance
Insulation thickness
7.62 mm Pitch
TLP708 Type
7.0 mm (min)
7.0 mm (min)
0.4 mm (min)
10.16 mm Pitch
TLP708F Type
8.0 mm (min)
8.0 mm (min)
0.4 mm (min)
UL-recognized:
UL 1577, File No. E67349
cUL-recognized:
CSA Component Acceptance Service No.5A
File No. E67349
VDE-approved:
EN 60747-5-5, EN 62368-1 (Note 1)
Note 1 : When a VDE approved type is needed,
please designate the Option (D4).
Pin Configuration (Top View)
1
VCC 6
1:ANODE
2:N.C.
3:CATHODE
2
5
4:GND
5:VO(Output)
3
GND 4
SHIELD
6:VCC
123
7.62±0.25
1.27±0.2
0.4±0.1
1.25±0.25
9.7±0.3
TOSHIBA
11-5J1S
Weight: 0.26 g (t y p .)
TLP708F
4.58±0.25
654
Unit: mm
123
7.62±0.25
1.27±0.2
0.4±0.1
0.75±0.25
11.7±0.3
TOSHIBA
11-5J101S
Weight: 0.26 g (t y p .)
© 2019
1
Toshiba Electronic Devices & Storage Corporation
Start of commercial production
2010-06
2019-09-25


Toshiba Electronic Components Datasheet

TLP708F Datasheet

Photocoupler

No Preview Available !

Schematic
IF
1
3
ICC
VCC
IO 6
VO
5
TLP708 / TLP708F
Truth Table
Input
H
L
Output
L
H
SHIELD
GND
4
Note: A 0.1µF bypass capacitor must be connected between pins 6 and 4.
Absolute Maximum Ratings (Ta = 25)
Characteristics
Symbol
Rating
Unit
Forward Current
(Ta < 110)
IF
25
mA
Forward Current Derating
(Ta 110)
IF/
-0.67
mA/
Pulse Forward Current (Note 1) (Ta < 110)
IFP
50
mA
Pulse Forward Current Derating (Ta 110)
IFP/
-1.34
mA/
Reverse Voltage
VR
5
V
Input Power Dissipation
(Ta < 110)
PD
40
mW
Input Power Dissipation Derating (Ta 110)
PD/
-1.0
mW/
Output Current
(Ta 125)
IO
25
mA
Output Voltage
VO
6
V
Supply Voltage
VCC
6
V
Output Power Dissipation
(Ta < 110)
PO
80
mW
Output Power Dissipation
Derating
(Ta 110)
PO/
-2.0
mW/
Operating Temperature Range
Topr
40 to 125
Storage Temperature Range
Tstg
55 to 150
Lead solder Temperature (10 s)
Tsol
260
Isolation voltage (Note 2)
BVS
5000
Vrms
Note: Using continuously under heavy loads (e.g. an application of high temperature/current/voltage and a significant change in
temperature, etc.) may cause this product to decrease in reliability significantly even if the operating conditions (i.e. operating
temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling
Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate,
etc)
Note 1: Pulse width 1ms, duty = 50 %
Note 2: R.H. 60 %, Ta = 25 , AC 60 s
This device is regarded as a two-terminal device: pins 1, 2 and 3 are shorted together,
and pins 4, 5 and 6 are shorted together.
© 2019
2
Toshiba Electronic Devices & Storage Corporation
2019-09-25


Part Number TLP708F
Description Photocoupler
Maker Toshiba
PDF Download

TLP708F Datasheet PDF






Similar Datasheet

1 TLP708 Photocoupler
Toshiba
2 TLP708F Photocoupler
Toshiba





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy