Datasheet4U Logo Datasheet4U.com

T6963CFG - DOT MATRIX LCD CONTROLLER

Features

  • Weight: 1.2 g (typ. ) z Display format (pin.
  • selectable) Columns : 32, 40, 64, 80 Lines : 2, 4, 6, 8, 10, 12, 14, 16, 20, 24, 28, 32 The combination of number of columns and number of lines must not cause the frequency to exceed 5.5 MHz. (See Fig. 2) z Character font (pin.
  • selectable) Horizontal dots : 5, 6, 7, 8 Vertical dots : 8 (fixed) It is necessary to set a character font in Graphic mode just as in Text mode. The oscillation frequency does not change with the font selection.

📥 Download Datasheet

Datasheet preview – T6963CFG

📁 Similar Datasheet

  • T6963C - DOT MATRIX LCD CONTROLLER (Toshiba)
  • T6960 - SINGLE-STAGE FROST PROTECTION THERMOSTATS (Honeywell)
  • T6961 - SINGLE-STAGE FROST PROTECTION THERMOSTATS (Honeywell)
  • T690N - Phase Control Thyristor (Infineon)
  • T6950 - SINGLE-STAGE FROST PROTECTION THERMOSTATS (Honeywell)
  • T6951 - SINGLE-STAGE FROST PROTECTION THERMOSTATS (Honeywell)
Other Datasheets by Toshiba Semiconductor

    Full PDF Text Transcription

    Click to expand full text
    www.DataSheet4U.com T6963CFG TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC T6963CFG DOT MATRIX LCD CONTROLLER LSI The T6963CFG is an LCD controller designed to be used with LCD control driver LSIs and data display memories. The device has an 8−bit parallel data bus and control lines for reading or writing through an MPU interface. It can be directly connected to a TMPZ−80. It has a 128−word character generator ROM which can control an external display RAM of up to 64 Kbytes. Allocation of text, graphics and external character generator RAM can be made easily and the display window can be moved freely within the allocated memory range. The device supports a very broad range of LCD formats by allowing selection of different combinations via a set of programmable inputs.
    Published: |