TA48M025F Datasheet | Toshiba

TA48M025,03,033,0345,04,05F TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA48M025F,TA48M03F,TA48M033F TA48M0345F,TA48M04F,TA48M05F 2.5 V, 3 V, 3.3 V, 3.45 V, 4 V, 5 V Three-Terminal Low Dropout Voltage Regulator The TA48M- - F series consists of fixed-positive-output, low dropout regulators with an output current of 500 m A (max). In response to the need for low voltage devices, the series offers devices with low output voltages of 2.5 V, 3.3 V etc. Features - Maximum output current of 0.5 A - Low standby current: 800 μA (typ.) - Low dropout voltage: 0.65 V (max) @IOUT = 0.5 A - Protection function: overcurrent/overheat/overvoltage/reversed power supply connections. - New PW-Mold package (Surface-mount type) HSOP3-P-2.30D Weight HSOP3-P-2.30D: 0.36 g ( typ.) Pin Assignment Marking side 132 IN GND OUT Marking 48M- - F Note 1: A line under a Lot No. identifies the indication of product Labels. Not underlined: [[Pb]]/INCLUDES > MCV Product No.(or abbreviation code) Underlined: [[G]]/Ro HS PATIBLE or [[G]]/Ro HS [[Pb]] Lot No. Note 1 Please contact your TOSHIBA sales representative for details as to environmental matters such as the Ro HS patibility of Product. The Ro HS is the Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Note 2: The “- - ” part of each product number varies according to the output voltage of the product. The product(s) in this document (“Product”) contain functions intended to protect the Product from temporary small overloads such as minor short-term overcurrent, overvoltage, or overheating. The protective functions do not necessarily protect Product under all circumstances. When incorporating Product into your system, please design the system (1) to avoid such overloads upon the Product, and (2) to shut down or otherwise relieve the Product of such overload conditions immediately...