Datasheet4U Logo Datasheet4U.com

TA8201AK - BTL AUDIO POWER AMPLIFIER

Description

Symbol Recommended Value Feature C1 4.7µF DC blocking C2 47µF Feedback condenser C3 220µF Ripple reduction C4 0.15µF Oscillation prevention C5 1000µF Ripple filter Influence Smaller Than Larger Than Recommended Recommended Value Value Related to popping noise at VCC → on R

Features

  • High power: POUT (1) = 17W (typ. ) (VCC = 14.4V, f = 1kHz, THD = 10%, RL = 4Ω) : POUT (2) = 14W (typ. ) (VCC = 13.2V, f = 1kHz, THD = 10%, RL = 4Ω).
  • Very few external parts.
  • Built in protector circuit Thermal shut down, over voltage protector (typ. VCC = 24V) ASO protector (RL short, Out to GND, Out to VCC).
  • 7 pin small package.
  • Operating supply voltage range: VCC = 9~18V Weight: 2.19g (typ. ) 1 2002-10-30 Block Diagram ＋ － Directions For Use And.

📥 Download Datasheet

Datasheet Details

Part number TA8201AK
Manufacturer Toshiba
File Size 716.74 KB
Description BTL AUDIO POWER AMPLIFIER
Datasheet download datasheet TA8201AK Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TA8207K LOW FREQUENCY POWER AMPLIFIER UTC
TA8210AH 20W BTL x 2CH AUDIO POWER AMPLIFIER Toshiba
TA8210AL 20W BTL x 2CH AUDIO POWER AMPLIFIER Toshiba
TA8211AH DUAL AUDIO POWER AMPLIFIER Toshiba
TA8212F 4CH POWER DRIVER Toshiba

Other Datasheets by Toshiba

Part Number Description
TA8200AH DUAL AUDIO POWER AMPLIFIER
TA8205AH 18W BTL x 2CH AUDIO POWER AMPLIFIER
TA8205AL 18W BTL x 2CH AUDIO POWER AMPLIFIER
TA8207K TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA8208H 5.8W DUAL AUDIO POWER AMPLIFIER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA8201AK BTL Audio Power Amplifier TA8201AK The TA8201AK is a audio power amplifier for consumer application. This IC is applying BTL system in which output coupling condenser and bootstrap condenser are not necessary and output 17W (VCC = 14.4V, BL =4Ω, THD = 10%) can be obtained. Since the package is a 7 pin SIP, (signal inline package), it greatly simplifies construction of a power amplifier both in design and assembly. It also contains various kind of protector. It is suitable for car−audio power amplifier with high performance. Features · High power: POUT (1) = 17W (typ.) (VCC = 14.4V, f = 1kHz, THD = 10%, RL = 4Ω) : POUT (2) = 14W (typ.) (VCC = 13.
Published: |