TA8264AHQ
Overview
- High power : POUTMAX (1) = 41 W (typ.) (VCC = 14.4 V, f = 1 kHz, JEITA max, RL = 4 Ω) : POUTMAX (2) = 37 W (typ.) (VCC = 13.7 V, f = 1 kHz, JEITA max, RL = 4 Ω) : POUT (1) = 24 W (typ.) (VCC = 14.4 V, f = 1 kHz, THD = 10%, RL = 4 Ω) : POUT (2) = 21 W (typ.) (VCC = 13.2 V, f = 1 kHz, THD = 10%, RL = 4 Ω) * * * * * * * *
- Built-in diagnosis circuit (pin 25) Low distortion ratio: THD = 0.02% (typ.) (VCC = 13.2 V, f = 1 kHz, POUT = 5 W, RL = 4 Ω) Low noise: VNO = 0.18 mVrms (typ.) (VCC = 13.2 V, Rg = 0 Ω, GV = 34dB, BW = 20 Hz~20 kHz) Built-in stand-by switch function (pin 4) Built-in muting function (pin 22) Built-in AUX amplifier from single input to 2 channels output (pin 16) Built-in various protection circuit : Thermal shut down, over voltage, out to GND, out to VCC, out to out short, speaker burned Operating supply voltage: VCC (opr) = 9~18 V Note 1: Install the product correctly. Otherwise, it may result in break down, damage and/or degradation to the product or equipment. Note 2: These protection functions are intended to avoid some output short circuits or other abnormal conditions temporarily. These protect functions do not warrant to prevent the IC from being damaged. - In case of the product would be operated with exceeded guaranteed operating ranges, these protection fe
