Photocouplers GaAs Infrared LED & Photo Triac
TLP265J
TLP265J
1. Applications
• Triac Drivers
• Programmable Logic Controllers (PLCs)
• AC-Output Modules
• Solid-State Relays
2. General
The TLP265J consists of a non zero crossing photo triac, optically coupled to a gallium arsenide infrared emitting
diode. The TLP265J is housed in the SO6 package and guarantees a creepage distance of 5.0 mm (min), a clearance
of 5.0 mm (min) and insulation thickness of 0.4 mm (min). Therefore, the TLP265J meets the reinforced insulation
class requirements of international safety standards.
3. Features
(1) Peak off-state voltage: 600 V (min)
(2) Non zero crossing functionary (NZC)
(3) Trigger LED current: 10 mA (max)
(4) On-state current: 70 mA (max)
(5) Isolation voltage: 3750 Vrms (min)
(6) Safety standards
UL-approved: UL1577 File No.E67349
cUL-approved: CSA Component Acceptance Service No.5A, File No.E67349
VDE-approved: Option (V4) EN60747-5-5 (Note)
Maximum operating insulation voltage: 707 Vpeak
Highest permissible overvoltage: 6000 Vpeak
Note: When an EN60747-5-5 approved type is needed, please designate the Option (V4).
Table Trigger LED Current (Note) (Unless otherwise specified, Ta = 25 )
Rank
IFT Rank
Marking
Test Condition
Trigger LED Current IFT Trigger LED Current IFT
(min)
(max)
None
(IFT7)
10 VT = 6 V
7 VT = 6 V
10
7
Note:
Specify both the part number and a rank in this format when ordering.
Example: TLP265J (IFT7)
For safety standard certification, however, specify the part number alone.
Example: TLP265J
Unit
mA
Start of commercial production
2012-11
1 2015-03-13
Rev.6.0
![[partsNo] view html](https://d4u-datasheet.netdna-ssl.com/img/html.jpg "[partsNo] view html"){kind=small}
