Datasheet4U Logo Datasheet4U.com

E2561 - E2561-Type Eml Module

Description

The E2561-series EMLs are designed for 10 Gb/s DWDM or TDM transmission applications.

The EML integrates a CW laser with an electroabsorption modulator in the same semiconductor chip.

Features

  • Integrated electroabsorption modulator 1.5 µm wavelength, full C-band Characterized for 10 Gb/s operation For use up to 80 km at 10 Gb/s Low modulation voltage Temperature stabilized Wavelength selectable to ITU-T standards Ultrastable wavelength aging for DWDM.

📥 Download Datasheet

Datasheet preview – E2561

Datasheet Details

Part number E2561
Manufacturer TriQuint Semiconductor
File Size 273.98 KB
Description E2561-Type Eml Module
Datasheet download datasheet E2561 Datasheet
Additional preview pages of the E2561 datasheet.

📁 Similar Datasheet

  • E25-10 - 25~30 Watts DIP Type 2:1 Input DC-DC Converter (FranMar)
  • E25-11 - 25~30 Watts DIP Type 2:1 Input DC-DC Converter (FranMar)
  • E25-14 - 25~30 Watts DIP Type 2:1 Input DC-DC Converter (FranMar)
  • E25-17 - 25~30 Watts DIP Type 2:1 Input DC-DC Converter (FranMar)
  • E25-18 - 25~30 Watts DIP Type 2:1 Input DC-DC Converter (FranMar)
  • E25-20 - 25~30 Watts DIP Type 2:1 Input DC-DC Converter (FranMar)
  • E25-21 - 25~30 Watts DIP Type 2:1 Input DC-DC Converter (FranMar)
  • E25-24 - 25~30 Watts DIP Type 2:1 Input DC-DC Converter (FranMar)
  • E25-27 - 25~30 Watts DIP Type 2:1 Input DC-DC Converter (FranMar)
  • E25-28 - 25~30 Watts DIP Type 2:1 Input DC-DC Converter (FranMar)
Other Datasheets by TriQuint Semiconductor

    Full PDF Text Transcription

    Click to expand full text
    Data Sheet March 2003 www.DataSheet4U.com E2561-Series 10 Gb/s EML Modules for up to 80 km Transmission Description Tri Qu int The E2561-series EMLs are designed for 10 Gb/s DWDM or TDM transmission applications. The EML integrates a CW laser with an electroabsorption modulator in the same semiconductor chip. These devices can replace external modulators that are often bulkier, more expensive, and require more drive electronics than the EML. The 10 Gb/s EML uses an SMP-type, subminiature, push-on connector to handle the RF signal. The package also contains a thermoelectric cooler (TEC), thermistor, rear-facet monitor photodiode, and an optical isolator. The nominal input impedance of the 10 Gb/s EML is 50 Ω. The package is qualified to the Telcordia Technologies ™ TA-TSY-000468 standard.
    Published: |