6L6GC-STR Datasheet | Tube Amp Doctor

TECHNICAL DATA Version 1.3 Produktbild - 6L6GC-STR High Performance Audio Beam Power Pentode The new 6L6GC-STR forwards the low end with pressure and has all the guts and bite to perfectly acplish all those sounds from big cleans, classic R´n´R like SRV to modern hard rocking tones. It´s all there with live and breath and the little magic in tone that inspires to keep playing. This TAD 6L6GC-STR bines the famous reliability of the American-made Philips/Sylvania STR series plus the beefed-up blackplate system like the highly regarded vintage RCA 6L6GC tubes. We joined best of both worlds! Silky top end bined with deep bass response and lots of headroom make this tube a living classic. Characteristics Electrical Heater: Voltage (AC or DC) Current Cathode: Cathode-to-heater potential, max. Direct interelectrode capacitances, max.- - - Grid no.1 to cathode and grid no.3, grid no.2, base sleeve and heater Plate to cathode and grid no.3, grid no.2, base sleeve and heater Grid no.1 to plate Mechanical Operating Position Base Dimensions: Height Seated height Diameter Cooling Approximate net weight - - - Without external shielding, nominal values Min. 5.8 Nom. Max. 6.3 6.8 V ca. 0.9 A Oxide-coated, unipotential +200 V Typical Performance 6L6GC Curve <10 p F <6.5 p F <0.6 p F Any JEDEC #8ET, octal, 8-pin 109 mm (4.29”) 95 mm (4.74”) 38 mm (1.49”) Convection 50 g (1.76 oz.) AF Power Amplifier Maximum ratings DC plate voltage Grid no.2 DC (screen) voltage Grid no.1 (control) voltage DC cathode current Plate dissipation Grid no.2 DC (screen) dissipation Typical Operation AF Power Amplifier, Class A1 (single tube) Plate Voltage Grid 2 Screen Voltage Grid 1 Control Voltage- Peak AF Grid 1 Control Voltage Zero Signal Plate Current Maximum Signal Plate Current Zero Signal Grid 2 Screen Current (avg) Transconductance (nominal) Load Resistance Output Power at 13% distortion - Approximate Value (set to zero signal plate current) 550 V 450 V - 37 V 100 m A 30 W...