TPA11FGPC Datasheet | Tyco Electronics

TP Series Pushbutton Switches, Tiny, Part Number Matrix MATERIAL SPECIFICATIONS: Contacts ......................................Gold - gold plate, silver - silver plate Case Material..............................High temperature polyester Actuator Material........................Polyamide Terminals/Fixed Contacts ..........Tin lead plate Terminal Seal..............................SP epoxy, DP epoxy optional TYPICAL PERFORMANCE CHARACTERISTICS: Contact Rating ............................Gold: 0.4 VA Max. @ 20 VDC or peak AC Silver: 1A @ 125 VAC or 28 VDC resistive Initial Contact Resistance ..........20 Milliohms max. Contact Timing ..........................Break-before-make Insulation Resistance ..................1,000 Megohms @ 500VDC min. Dielectric Strength......................1,000 Volts @ sea level Actuation Force ..........................50 to 400 Grams Plunger/Actuator Travel .............030" (.762) Life Expectancy..........................See below Note: Hardware included with switches ENVIRONMENTAL SPECIFICATIONS: Operating Temperature ..............-22°F to +149°F (-30°C to +65°C) Storage Temperature ..................-22°F to +149°F (-30°C to +65°C) Solder Heat Resistance ..............See page M3-4 D TP Series PART NUMBERING MATRIX Model TP Blank= Sq. No Bushing A=Rnd. No Bushing B=Rnd., .188" Bushing Dia. Unthreaded C=Rnd., 10/48 Bushing Dia. D=Rnd., .250" Bushing Dia. Unthreaded F=Rnd., 1/4-40 Bushing Dia. F = Flush Actuator- - - - - - - - - - - Available with “B” and "C" bushing only Silver - available only in wire lug and PC termination Right angle, ES available with “B” and "C" bushing only Available only in single pole ES switches provided with disposable boot used only during cleaning operation. 1 = Single 2 = Double 1 = Gold 0.4 VA 3 = Silver- -...