Power relay K (open and sealed)
- High continuous current
- Wide voltage range
- Lamp control circuits
- Seat adjustment motors
- Window defoggers
- Starter solenoid switches etc.
Please contact Tyco Electronics
for relay application support.
Open or sealed;
sealed version: sealing in accordance
with IEC 68;
immersion cleanable: protection class
IP 67 to IEC 529 (EN 60 529)
Approx. 0.67 oz. (19 g) open version
Approx. 0.77 oz. (22 g) sealed version
12 V or 24 V;
other nominal voltages available on
PCB terminals, for assembling in
printed circuit boards
All parametric, environmental and
endurance tests are performed
according to EIA Standard RS-407-A
at standard test conditions unless
23 °C ambient temperature,
20-50% RH, 29.5 ± 1.0" Hg
(998.9 ±33.9 hPa).
Please also refer to the Application
Recommendations in this catalog
for general precautions.
133_3d01 / 76_3d01
All technical performance data apply to the relay as such, specific conditions of the individual application are not considered. Please always check the suitability of
the relay for your intended purpose. We do not assume any responsibility or liability for not complying herewith. We recommend to complete our questionnaire and
to request our technical service. Any responsibility for the application of the product remains with the customer only. All specifications are subject to change without
notification. All rights of Tyco are reserved.
Please observe the disclaimer.
Free Datasheet http://www.0PDF.com