MAATSS0020 Datasheet | Tyco Electronics

Features - - - - - - - - - - 1-d B Attenuation Steps to 31 d B Ultra Low DC Power Consumption Low Intermodulation Products: IP3 = 50 d Bm Tape and Reel Packaging Available Temperature Stability: ± 0.15 d B from -40°C to +85°C Lead-Free SSOP-20 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold pound 260°C Reflow patible Ro HS- pliant Version of AT-260 Description M/A-’s MAATSS0020 is a 5-bit, 1-d B step Ga As MMIC digital attenuator in a lead-free SSOP-20 surface mount plastic package. The MAATSS0020 is ideally suited for use where high accuracy, fast switching, very low power consumption and low intermodulation products are required at a low cost. Typical applications include radio and cellular equipment, wireless LANS, GPS equipment and other gain/level control circuits. The MAATSS0020 is fabricated with a monolithic Ga As MMIC using a mature 1-micron process. The process features full chip passivation for increased performance and reliability. Pin Configuration Pin No. 1 2 3 4 5 6 7 8 9 10 Function VC1 VC1 VC2 VC2 VC3 VC3 VC4 VC4 No Connection VC5 Pin No. 11 12 13 14 15 16 17 18 19 20 Function RF1 Ground Ground Ground Ground Ground Ground Ground Ground RF2 Ordering Information Part Number MAATSS0020 MAATSS0020TR-3000 1. Absolute Maximum Ratings 2,3 Package SSOP 20-Lead 3000 piece reel Parameter Input Power: 0.05 GHz 0.5 - 2.0 GHz Control Voltage Operating Temperature Storage Temperature Absolute Maximum +27 d Bm +34 d Bm +5 V, -8.5 V -40°C to +85°C -65°C to +150°C Reference Application Note M513 for reel size information. 2. Exceeding any one or bination of these limits may cause permanent damage to this device. 3. M/A- does not remend sustained operation near these survivability limits. - Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A- Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A- makes no warranty, representation or...