OMIH-SS-1xxx Datasheet | Tyco Electronics

Features - Meet UL 508, VDE0435 and SEMKO requirements. - 1 Form A and 1 Form C contact arrangements. .. - Immersion cleanable, sealed version available. - Meet 5,000V dielectric voltage between coil and contacts. - Meet 10,000V surge voltage between coil and contacts (1.2 / 50µs). Coil Data @ 20°C OMI/OMIH-L Sensitive Rated Coil Voltage (VDC) 5 6 9 12 24 48 Nominal Current (m A) 106.4 88.0 58.0 44.4 21.8 10.9 Coil Resistance (ohms) ± 10% 47 68 155 270 1,100 4,400 Must Operate Voltage (VDC) 3.75 4.50 6.75 9.00 18.00 36.00 Must Release Voltage (VDC) 0.50 0.60 0.90 1.20 2.40 4.80 Contact Data @ 20°C Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Ag Alloy (OMI), Ag Sn O (OMIH). Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100m A @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. OMI/OMIH-D Standard Rated Coil Voltage (VDC) 5 6 9 12 24 48 Nominal Current (m A) 138.9 120.0 78.3 60.0 29.3 14.5 Coil Resistance (ohms) ± 10% 36 50 115 200 820 3,300 Must Operate Voltage (VDC) 3.50 4.20 6.30 8.40 16.80 33.60 Must Release Voltage (VDC) 0.50 0.60 0.90 1.20 2.40 4.80 Contact Ratings Ratings: OMI: 10A @ 240VAC resistive, 10A @ 30VDC resistive, 3A @ 240VAC inductive (cosø= 0.4), 3A @ 30VDC inductive (L/R=7msec). OMIH:16A @ 240VAC resistive, 16A @ 30VDC resistive, 4A @ 240VAC inductive (cosø= 0.4), 4A @ 24VDC inductive (L/R=7msec). Max. Switched Voltage: AC: 250V. DC: 30V. Max. Switched Current: 10A (OMI), 16A (OMIH). Max. Switched Power: OMI: 2,400VA, 300W. OMIH: 3,800VA, 480W. Operate Data Must Operate Voltage: OMI/OMIH-D: 70% of nominal voltage or less. OMI/OMIH-L: 75% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time: OMI/OMIH-D: 15 ms max. OMI/OMIH-L: 20 ms max. Release Time: 8 ms max. Environmental Data Initial Dielectric Strength Between Open...