Datasheet4U Logo Datasheet4U.com

L1131A - LOW NOISE 150mA LDO REGULATOR

General Description

The UTC L1131A is a COMS positive linear regulator.

One of it’s feature is the very low quiescent current typical as low as 10μA and its dropout voltage is extremely low with 150mA output current, and high ripple rejection.

Key Features

  • r>.
  • Low supply current Typ. 4.3μA.
  • Standby mode Typ. 0.1μA.
  • Output Voltage Range 1.2V~5.0V.
  • Excellent line regulation Typ. 0.02%/V.
  • Built-in fold back protection circuit.
  • Ceramic capacitors are recommended to be used with this IC CIN=COUT=1μF.

📥 Download Datasheet

Full PDF Text Transcription for L1131A (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for L1131A. For precise diagrams, and layout, please refer to the original PDF.

UNISONIC TECHNOLOGIES CO., LTD L1131A LOW NOISE 150mA LDO REGULATOR  DESCRIPTION The UTC L1131A is a COMS positive linear regulator. One of it’s feature is the very low ...

View more extracted text
a COMS positive linear regulator. One of it’s feature is the very low quiescent current typical as low as 10μA and its dropout voltage is extremely low with 150mA output current, and high ripple rejection. Each of these ICs consists of a voltage reference unit, an error amplifier, resistor-net for voltage setting, a short current limit circuit, a chip enable circuit, and so on. These ICs perform with low dropout voltage and the chip-enable function. The supply current at no load of this IC is only 4.