Datasheet4U Logo Datasheet4U.com

UT3232 - 3.0V TO 5.5V LOW POWER MULTICHANNEL RS-232 LINE TRANSCEIVERS

General Description

The UTC UT3232 has two receivers and two drivers, and a dual charge-pump circuit.

The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector.

Key Features

  • Exceeds ±8KV ESD Protection(HBM) for RS-232 I/O Pins.
  • Meets the Requirements of TIA/EIA-232-F and ITU V.28 Standards.
  • Operates With 3.0V to 5.5V VCC Supply.
  • Operates Up To 250kbit/s Data Rate.
  • Two Drivers and Two Receivers.
  • External Capacitors 4×0.1μF.
  • Accepts 5.0V Logic Input With 3.3V Supply.

📥 Download Datasheet

Full PDF Text Transcription for UT3232 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for UT3232. For precise diagrams, and layout, please refer to the original PDF.

UNISONIC TECHNOLOGIES CO., LTD UT3232 3.0V TO 5.5V LOW POWER MULTICHANNEL RS-232 LINE TRANSCEIVERS USING FOR 0.1μF EXTERNAL CAPACITORS  DESCRIPTION The UTC UT3232 has tw...

View more extracted text
SING FOR 0.1μF EXTERNAL CAPACITORS  DESCRIPTION The UTC UT3232 has two receivers and two drivers, and a dual charge-pump circuit. The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3.0V to 5.5V supply. The device operates at data signaling rates up to 250kbit/s and a maximum of 35V/μs driver output slew rate.  FEATURES * Exceeds ±8KV ESD Protection(HBM) for RS-232 I/O Pins * Meets the Requirements of TIA/EIA-232-F and ITU V.2