Datasheet4U Logo Datasheet4U.com

UU642 - INTERVAL AND WIPE/WASH WIPER CONTROLLER

General Description

The bipolar integrated circuit UTC UU642 is designed as a wiper for automotive application.

It includes wipe, wash and internal mode.

The UTC UU642 is a cost-effective solution for an accurate timing function control.

Key Features

  • After-wiping time: 2s~20s.
  • Interval pause: 4s~20s.
  • Wipe/wash mode priority.
  • Wiper motor’s park switch.
  • Relay driver with Z-diode.
  • One external capacitor determines all time sequences.
  • Interference protection according to VDE 0839 or ISO/TR 637/1.
  • Load-dump protected.

📥 Download Datasheet

Full PDF Text Transcription for UU642 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for UU642. For precise diagrams, and layout, please refer to the original PDF.

UNISONIC TECHNOLOGIES CO., LTD UU642 LINEAR INTEGRATED CIRCUIT INTERVAL AND WIPE/WASH WIPER CONTROL IC  DESCRIPTION The bipolar integrated circuit UTC UU642 is designed ...

View more extracted text
IC  DESCRIPTION The bipolar integrated circuit UTC UU642 is designed as a wiper for automotive application. It includes wipe, wash and internal mode. The UTC UU642 is a cost-effective solution for an accurate timing function control. Wipe/wash mode has priority over interval mode. Interval pause and after-wiping time can be set to fixed values by using resistors in a broad time range. Added value can be provided with an individual, continuous adjustment of the interval pause by a potentiometer which may be built into the stalk. For proper operation, it is mandatory to feed the signal of the wiper motor’s park switch into

More Datasheets from Unisonic Technologies

Part Number Description
UU6043B FLASHER IC