Datasheet4U Logo Datasheet4U.com

UC5601 - SCSI Active Terminator

Description

The UC5601 provides precision resistive pull-up to a 2.9V reference for all 18 lines in a Small Computer Systems Interface (SCSI) bus cable.

The SCSI-2 standard recommends active termination at both ends of every cable segment utilizing single ended drivers and receivers.

Features

  • Complies with SCSI, SCSI-2 Standards.
  • 10pF Channel Capacitance During Disconnect.
  • Active Termination for 18 Lines.
  • Logic Command Disconnects all Termination Lines.
  • Low Supply Current in Disconnect Mode.
  • Trimmed Regulator for Accurate Termination Current.
  • Current Limit and Thermal Shutdown Protection.
  • 110 Ohm Termination.
  • Meets SCSI Hot Plugging BLOCK.

📥 Download Datasheet

Datasheet Details

Part number UC5601
Manufacturer UNITRODE
File Size 454.19 KB
Description SCSI Active Terminator
Datasheet download datasheet UC5601 Datasheet

📁 Similar Datasheet

  • UC530 - OEM GPS Antenna Module (Fastrax)
  • UC5301 - SWITCHED-CAPACITOR VOLTAGE INVERTERS (Unisonic Technologies)
  • UC530M - Multi-GNSS antenna module (Fastrax)
  • UC55 - Chip Mica Capacitor 5.7x5 size (Soshin)
Other Datasheets by UNITRODE

Full PDF Text Transcription

Click to expand full text
UC5601 SCSI Active Terminator FEATURES • Complies with SCSI, SCSI-2 Standards • 10pF Channel Capacitance During Disconnect • Active Termination for 18 Lines • Logic Command Disconnects all Termination Lines • Low Supply Current in Disconnect Mode • Trimmed Regulator for Accurate Termination Current • Current Limit and Thermal Shutdown Protection • 110 Ohm Termination • Meets SCSI Hot Plugging BLOCK DIAGRAM DESCRIPTION The UC5601 provides precision resistive pull-up to a 2.9V reference for all 18 lines in a Small Computer Systems Interface (SCSI) bus cable. The SCSI-2 standard recommends active termination at both ends of every cable segment utilizing single ended drivers and receivers.
Published: |