Datasheet4U Logo Datasheet4U.com

L2044 - DUAL OUTPUT FLASHER

General Description

The UTC L2044 is a dual output stages flasher designed as a relay driver for flashing light control in automotive applications.

Both sides direction indicator input with only a small control current makes switch contacts for small loads possible.

Each side of the vehicle is controlled separately.

Key Features

  • S.
  • Temperature and Supply Voltage Compensated Flashing Frequency.
  • Frequency Doubling Indicates Lamp Fault.
  • Two Relay Driver Outputs with High Current-carrying Capacity and Low Saturation Voltage.
  • Minimum Lamp Load for Flasher Operation: ≥ 1W.
  • Very Low Sensitivity to EMI.
  • Extremely Low Current Consumption.

📥 Download Datasheet

Full PDF Text Transcription for L2044 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for L2044. For precise diagrams, and layout, please refer to the original PDF.

UNISONIC TECHNOLOGIES CO., LTD L2044 LINEAR INTEGRATED CIRCUIT DUAL OUTPUT FLASHER  DESCRIPTION The UTC L2044 is a dual output stages flasher designed as a relay driver ...

View more extracted text
UTC L2044 is a dual output stages flasher designed as a relay driver for flashing light control in automotive applications. Both sides direction indicator input with only a small control current makes switch contacts for small loads possible. Each side of the vehicle is controlled separately. The construction of the hazard switch could be simplified due to hazard warning input is separate. The flasher will dramatically increase the flash frequency by a typical ratio of 2:1 if lamp fault is detected. The UTC L2044 can be directly connected to the battery due to extreme low current consumption.

More Datasheets from Unisonic Technologies

Part Number Description