Datasheet4U Logo Datasheet4U.com

L6142 - 17 MHz RAIL-TO-RAIL INPUT-OUTPUT DUAL OPERATIONAL AMPLIFIERS

General Description

The UTC L6142 provides new levels of performance in applications where low voltage supplies or power limitations previously made compromise necessary.

Operating on supplies of 2.7V to over 24V, the UTC L6142 is an excellent choice for battery operated systems, portable instrumentation and others.

Key Features

  • For 5V supply, Typ. unless noted.
  • Rail-to-rail Input : -0.25V~5.25V.
  • Rail-to-Rail Output : 0.005V~4.995V.
  • Slew Rate: Small Signal, 5V/μs Large Signal, 30V/μs.
  • Low Supply Current 450μA/Amplifier.
  • Wide Supply Range: 2.7V~24V.
  • Gain 108dB with RL=10k.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
L614F Power Modules Crydom Solid State Relays
L612F Power Modules Crydom Solid State Relays
L613 Power Modules Crydom Solid State Relays
L613F SCR / Diode Modules Crydom Corporation
L613F Power Modules Crydom Solid State Relays

Other Datasheets by Unisonic Technologies

Part Number Description
L6132 RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD L6142 Preliminary LINEAR INTEGRATED CIRCUIT 17 MHz RAIL-TO-RAIL INPUT-OUTPUT DUAL OPERATIONAL AMPLIFIERS  DESCRIPTION The UTC L6142 provides new levels of performance in applications where low voltage supplies or power limitations previously made compromise necessary. Operating on supplies of 2.7V to over 24V, the UTC L6142 is an excellent choice for battery operated systems, portable instrumentation and others. The greater than rail-to-rail input voltage range eliminates concern over exceeding the common-mode voltage range. The rail-to-rail output swing provides the maximum possible dynamic range at the output. This is particularly important when operating on low supply voltages.