Datasheet4U Logo Datasheet4U.com

LM386L - LOW VOLTAGE AUDIO POWER AMPLIFIER

General Description

The UTC LM386 is a power amplifier, designed for use in low voltage consumer applications.

The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pin 1 and pin 8 will increase the gain to any value up from 20 to 200.

Key Features

  • S.
  • Battery Operation.
  • Minimum External Parts.
  • Wide Supply Voltage Range: 4V~12V.
  • Low Quiescent Current Drain:4mA.
  • Voltage Gains: 20~200.
  • Ground Referenced Input.
  • Self-Centering Output Quiescent Voltage.
  • Low Distortion: 0.2% (Av=20, VS=6V, RL=8Ω, PO=125mW, f=1kHz).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM386 Low Voltage Audio Power Amplifier National Semiconductor
LM386 Low Voltage Audio Power Amplifier Texas Instruments
LM386 Low Voltage Audio Power Amplifier ART CHIP
LM386 Low Voltage Audio Power Amplifier HTC
LM386 LOW VOLTAGE AUDIO POWER AMPLIFIER ChipSourceTek

Other Datasheets by Unisonic Technologies

Part Number Description
LM386 LOW VOLTAGE AUDIO POWER AMPLIFIER
LM317 ADJUSTABLE VOLTAGE REGULATOR
LM317A MEDIUM CURRENT 1.2V TO 37V ADJUSTABLE VOLTAGE REGULATOR
LM317L LOW CURRENT 1.25V TO 37V ADJUSTABLE VOLTAGE REGULATOR
LM317M MEDIUM CURRENT 1.2V TO 37V ADJUSTABLE VOLTAGE REGULATOR
LM317S HIGH CURRENT 1.3V TO 37V ADJUSTABLE VOLTAGE REGULATOR
LM318 HIGH SPEED OPERATIONAL AMPLIFIER
LM324 QUAD OPERATIONAL AMPLIFIERS
LM339 QUAD DIFFERENTIAL COMPARATOR
LM339-Q QUAD DIFFERENTIAL COMPARATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD LM386 LINEAR INTEGRATED CIRCUIT LOW VOLTAGE AUDIO POWER AMPLIFIER  DESCRIPTION The UTC LM386 is a power amplifier, designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pin 1 and pin 8 will increase the gain to any value up from 20 to 200. The inputs are ground referenced while the output automatically biases to one-half the supply voltage. The quiescent power drain is only 24 milliwatts when operating from a 6 volt supply, making the LM386 ideal for battery operation.