Datasheet4U Logo Datasheet4U.com

LR1107 - 600mA FAST ULTRA LOW DROPOUT LINEAR REGULATOR

Description

The UTC LR1107/E is an ultra low-dropout linear regulators.

Wide output voltage range options are available.

The fast response characteristic to make UTC LR1107/E suitable for low voltage microprocessor application.

Features

  • Ultra Low Dropout Voltage.
  • Low Ground Pin Current.
  • 0.55% Load Regulation.
  • The Guaranteed Output Current is 600mA DC.
  • Output Voltage Accuracy ± 1.5%.
  • ERROR Flag Indicates Output Status.
  • VOUT can be Adjusted From 1.145V to 5V.
  • Low Output Capacitor Required.
  • Overtemperature Protection and Overcurrent Protection.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LR1110 Low Power Wi-Fi/ GNSS Scanner +LoRa Transceiver SEMTECH
LR1117 LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS LRC
LR1117A 1A Adjustable/Fixed Low Dropout Linear Regulator LRC
LR1117C 1A Bipolar Linear Regulator LRC
LR1121 Long range Low Power Multi-band Transceiver SEMTECH

Other Datasheets by Unisonic Technologies

Part Number Description
LR1107E 600mA FAST ULTRA LOW DROPOUT LINEAR REGULATOR
LR1101 CMOS LDO REGULATOR
LR1102 LOW NOISE 150mA LDO REGULATOR
LR1106 LARGE CURRENT POSITIVE VOLTAGE REGULATORS
LR1108 1A FAST ULTRA LOW DROPOUT LINEAR REGULATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD LR1107/E 600mA FAST ULTRA LOW DROPOUT LINEAR REGULATOR CMOS IC  DESCRIPTION The UTC LR1107/E is an ultra low-dropout linear regulators. Wide output voltage range options are available. The fast response characteristic to make UTC LR1107/E suitable for low voltage microprocessor application. The low quiescent current operation and low dropout quality caused by the CMOS process. The UTC LR1107/E has ultra low dropout voltage; 300mV at 600mA load current typically. The ground pin current is typically 150uA at 1mA load current. SET/ADJ Mode (for LR1107): Connect an external resistive voltage-divider from VOUT to this pin to set the output voltage from 1.145V to 5V.
Published: |