Datasheet4U Logo Datasheet4U.com

MC3419 - LOW POWER AUDIO AMPLIFIER

Description

The UTC MC3419 is a low power audio amplifier integrated circuit, intended for the telephone applications, such as in speakerphones.

It provides differential speaker outputs to maximize output swing at low supply voltages.

Coupling capacitor to the speaker is not required.

Features

  • Wide operating supply voltage: Vcc=2V~16V.
  • Low quiescent supply current (Icc=2.7mA, typ).
  • Medium output power (Po=250mW at Vcc=6V, RL=32ohm, THD=10%).
  • Load impedance range (8 to 100ohm).
  • Low distortion.
  • Mute function (Icc=65µA, typ).
  • Minimum number of external parts required TSSOP-8.
  • Pb-free plating product number: MC3419L BLOCK.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC3419 P-Channel 20-V (D-S) MOSFET Freescale
MC3419-1L SUBSCRIBER LOOP INTERFACE CIRCUIT Motorola
MC3419-P 3-Axis Accelerometer MEMSIC
MC3410 3-Axis Accelerometer mCube
MC3410 10-Bit high-speed multiplying D/A converter Philips

Other Datasheets by Unisonic Technologies

Part Number Description
MC34119 LOW POWER AUDIO AMPLIFIER
MC34018 VOICE SWITCHED SPEAKER-PHONE CIRCUIT
MC34063A DC TO DC CONVERTER CONTROLLER
MC34072 SINGLE SUPPLY OPERATIONAL AMPLIFIER
MC34074 SINGLE SUPPLY OPERATIONAL AMPLIFIER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com UTC MC3419 LINEAR INTEGRATED CIRCUIT LOW POWER AUDIO AMPLIFIER DESCRIPTION The UTC MC3419 is a low power audio amplifier integrated circuit, intended for the telephone applications, such as in speakerphones. It provides differential speaker outputs to maximize output swing at low supply voltages. Coupling capacitor to the speaker is not required. Open loop gain is 80dB, and the closed loop gain is set with two external resistors. A chips disable pin permits powering down and/or muting the input signal. SOP-8 DIP-8 FEATURES *Wide operating supply voltage: Vcc=2V~16V *Low quiescent supply current (Icc=2.
Published: |