Datasheet4U Logo Datasheet4U.com

P2576HV - 3A STEP-DOWN VOLTAGE SWITCHING REGULATOR

Download the P2576HV datasheet PDF. This datasheet also covers the P2576 variant, as both devices belong to the same 3a step-down voltage switching regulator family and are provided as variant models within a single manufacturer datasheet.

Description

As a step-down (buck) switching regulator, the UTC P2576/HV provides drives 3A load.

The UTC P2576/HV are simple because it only needs to use a minimum number of external components.

Frequency compensation and a fixes-frequency oscillator are in it.

Features

  • br>.
  • Output Current 3A.
  • Input Voltage Range of 7V to 40V for P2576 and 7V to 60V for P2576HV.
  • Requires 4 External Components.
  • Very High Efficiency.
  • TTL Shutdown.
  • Low Power Standby Mode.
  • Thermal Shutdown,.
  • Current Limit Protection.
  • Internal Oscillator: 52 kHz Fixed Frequency.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (P2576-UTC.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
P2500 Power Amplifier Yamaha
P2500A Standard Recovery Rectifier Diodes Diotec
P2500A Standard silicon rectifier diodes Semikron
P2500AA61L SIDACtor Device Littelfuse
P2500ATL Standard silicon rectifier diodes Semikron

Other Datasheets by Unisonic Technologies

Part Number Description
P2576 3A STEP-DOWN VOLTAGE SWITCHING REGULATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD P2576/HV LINEAR INTEGRATED CIRCUIT 3A STEP-DOWN VOLTAGE SWITCHING REGULATOR  DESCRIPTION As a step-down (buck) switching regulator, the UTC P2576/HV provides drives 3A load. The UTC P2576/HV are simple because it only needs to use a minimum number of external components. Frequency compensation and a fixes-frequency oscillator are in it. UTC P2576/HV can perform with standard inductors, and simplifying the switch mode power supplies’ design. UTC P2576/HV guarantees output load conditions and ±10% on the oscillator frequency. Its external shutdown is included with 50μA standby current. As well as thermal shutdown for full protection under fault conditions, the output switch has cycle by cycle current limiting.
Published: |