U74LVC2T45 Overview
This dual-bit noninverting bus transceiver uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65V to 5.5V.
U74LVC2T45 Key Features
- Fully Configurable Dual-Rail Design Allows Each Port to Operate Over the Full 1.65-V to 5.5-V Power-Supply Range
- VCC Isolation Feature: If Either VCC Input Is at GND, Both Ports Are in the High-Impedance State
- ±24mA Output Drive at 3.3V
- IOFF Supports Partial-Power-Down Mode Operation
- ORDERING INFORMATION
- MARKING