Datasheet4U Logo Datasheet4U.com

U8C3060 - 8 CHANNEL SERIAL INTERFACE LOW-SIDE DRIVER

Datasheet Summary

Description

The U8C3060 provides an 8-channel low side driver with overcurrent protection and open/shorted load detection.

It has built-in diodes to clamp turn-off transients generated by inductive loads, and can be used to drive unipolar stepper motors, DC motors, relays, solenoids, or other loads.

Features

  • 8 Channel Protected Low-side Driver Eight NMOS FETs with Overcurrent Protection Integrated Inductive Catch Diodes Serial Interface Open/Short Load Detection Configurable 100% Output Timing Configurable PWM Duty Cycle.
  • Continuous Current Driving Capability 560 mA (Single Channel) 200 mA (8 Channels) Support Parallel Configuration.
  • 8 V to 38 V Supply Voltage Range.
  • Input Digital Noise Filter for Noise Immunity.
  • Internal Data Read Back Capability for Reliable Control.

📥 Download Datasheet

Datasheet preview – U8C3060

Datasheet Details

Part number U8C3060
Manufacturer UTC
File Size 452.42 KB
Description 8 CHANNEL SERIAL INTERFACE LOW-SIDE DRIVER
Datasheet download datasheet U8C3060 Datasheet
Additional preview pages of the U8C3060 datasheet.

📁 Similar Datasheet

Other Datasheets by UTC
  • U8C3005 - 8-BIT SERIAL-IN PARALLEL-OUT VALVE DRIVER
  • U8C3525 - 8-BIT SERIAL-IN PARALLEL-OUT VALVE DRIVER

Full PDF Text Transcription

Click to expand full text
UNISONIC TECHNOLOGIES CO., LTD U8C3060 Preliminary LINEAR INTEGRATED CIRCUIT 8 CHANNEL SERIAL INTERFACE LOW-SIDE DRIVER  DESCRIPTION The U8C3060 provides an 8-channel low side driver with overcurrent protection and open/shorted load detection. It has built-in diodes to clamp turn-off transients generated by inductive loads, and can be used to drive unipolar stepper motors, DC motors, relays, solenoids, or other loads. U8C3060 can supply up to 200mA × 8 channel continuous output current. The current driving capability increased with lower PWM duty cycle. A single channel can deliver up to 560 mA continuous output current. A serial interface is provided to control the U8C3060 output drivers, configure internal setting register and read the fault status of each channel.
Published: |