Datasheet4U Logo Datasheet4U.com

UC3550 - PWM/PFM SWITCHABLE STEP-UP DC-DC CONTROLLER

Description

The UTC UC3550 series is a compact, high efficiency, step-up DC/DC controllers includes an error amplifier, oscillator, PWM comparator, skip cycle comparator, voltage reference, soft-start, and high speed lower ON-resistance driver for driving external power devices (NMOS or NPN) ,Additionally, a CE

Features

  • S.
  • Input Voltage Range：0.9~8V.
  • Output Voltage Range：1.8~6V Programmable in 0.1V with High Accuracy ± 2.5%.
  • High Efficiency 88% (Typ. ).
  • Low Start-up Voltage of 0.9V Typical at IOUT = 1.0mA.
  • Oscillator Frequency: 300kHz. (±20%).
  • Chip Enable Pin with Pull-up Current Source.
  • High Output Current up to 1000mA (VIN = 2.0V, VOUT =3.3V).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UC3551 ADVANCED PWM STEP-UP DC-DC CONVERTER Unisonic Technologies
UC3552 PWM DC-DC CONVERTER Unisonic Technologies
UC3524 ADVANCED REGULATING PULSE WIDTH MODULATORS Texas Instruments
UC3524A ADVANCED REGULATING PULSE WIDTH MODULATORS Unitrode
UC3525A SMPS Controller Fairchild Semiconductor

Other Datasheets by Unisonic Technologies

Part Number Description
UC3555 500MA HIGH EFFICIENCY BOOST REGULATOR
UC3500 HIGH EFFICIENCY VFM CONTROLLED STEP-UP DC/DC CONVERTER
UC3501 LOW COST FLASHLIGHT LED DRIVE
UC3535 DC-DC CONTROLLER
UC32061 SYNCHRONOUS STEP-DOWN DC/DC CONVERTER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD UC3550 PWM CONTROLLED, PWM/PFM SWITCHABLE STEP-UP DC-DC CONTROLLER „ DESCRIPTION The UTC UC3550 series is a compact, high efficiency, step-up DC/DC controllers includes an error amplifier, oscillator, PWM comparator, skip cycle comparator, voltage reference, soft-start, and high speed lower ON-resistance driver for driving external power devices (NMOS or NPN) ,Additionally, a CE (chip enable) function that reduces power consumption during shut-down mode. That typically operated from a single-or dual-cell battery packs. It have a driver pin ,ext pin, for connecting to an external transistor(NMOS or NPN). a lower ON-resistance external transistor can obtain larger output current.
Published: |