Datasheet4U Logo Datasheet4U.com

UH276 - COMPLEMENTARY OUTPUTS HALL EFFECT LATCH

Description

The UTC UH276 is a Latch-Type Hall Effect sensor with built-in complementary output drivers.

The UTC UH276 is a Latch-Type Hall Effect sensor with built-in complementary output drivers.

Features

  • Power Supply range from 3V ~ 20V.
  • On-chip Hall sensor with hysteresis.
  • Open Collector outputs had the sinking capability up to 300mA.
  • Output Clamping Diodes reduce the peak output voltages during switching.
  • Build-in reverse protection diode.
  • Pb-free plating product number:UH276L.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UH200 2-PHASE DC MOTOR DRIVER Unisonic Technologies
UH20FCT Dual Common-Cathode Ultrafast Recovery Rectifier Vishay Siliconix
UH210 2-PHASE DC MOTOR DRIVER Unisonic Technologies
UH211 HIGH SENSITIVITY HALL EFFECT SENSOR Unisonic Technologies
UH266 HIGH VOLTAGE HALL EFFECT LATCH Unisonic Technologies

Other Datasheets by Unisonic Technologies

Part Number Description
UH277 COMPLEMENTARY OUTPUTS HALL EFFECT LATCH
UH251 LOW-VOLTAGE 1.5 CHANNEL BI-DIRECTIONAL MOTOR DRIVER
UH255 SMART MOTOR DRIVER
UH288F COMPLEMENTARY OUTPUT HALL EFFECT FAN DRIVER
UH288R COMPLEMENTARY OUTPUT HALL EFFECT FAN DRIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com UNISONIC TECHNOLOGIES CO., LTD UH276 COMPLEMENTARY OUTPUTS HALL EFFECT LATCH IC DESCRIPTION The UTC UH276 is a Latch-Type Hall Effect sensor with built-in complementary output drivers. The UTC UH276 is a Latch-Type Hall Effect sensor with built-in complementary output drivers. It’s designed with internal temperature compensation circuit and built-in protection diode prevent reverse power fault. The application is aimed for brush-less DC Fan. The UH276 Outputs operate as the Hysteresis Characteristics. The Outputs alternately ON and OFF when either the magnetic flux density larger than threshold BOP or the magnetic flux density lower than BRP. LINEAR INTEGRATED CIRCUIT 1 SIP-4 FEATURES * Power Supply range from 3V ~ 20V. * On-chip Hall sensor with hysteresis.
Published: |