Datasheet4U Logo Datasheet4U.com

US2652SQ - LOW COST POWER-SAVING MODE PWM CONTROLLER

General Description

The UTC US2652SQ provides a CCM/valley switching mixed mode operation for better efficiency performance.

The operation mode stays at CCM at heavy load, and switch to valley switching at light load.

Key Features

  • S.
  • Proprietary frequency hopping for Improved EMI performance.
  • Low standby power with only 30~70mw.
  • Cycle-by-cycle current limiting.
  • CCM/Valley Switching Operation.
  • Fixed switch frequency 65~85kHz.
  • Dynamic peak current limiting for constant output power.
  • Built-in synchronized slope compensation.
  • Gate output voltage clamped at 16V.
  • Adjustable DC output OVP.
  • OLP/VCC OVP/OTP/BNO/LNO ( automatic recovery).
  • Internal Soft Start www. unisonic. com. tw.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
US2651 HIGH PRECISION LOW COST MCM POWER SWITCH Unisonic Technologies
US26650VT Lithium Ion Rechargeable Battery Sony
US20 RECTIFIERS ASSEMBLIES Microsemi Corporation
US2005 FIXED CURRENT LIMIT POWER DISTRIBUTION SWITCH UNISONIC TECHNOLOGIES
US200A RECTIFIERS ASSEMBLIES Microsemi Corporation

Other Datasheets by Unisonic Technologies

Part Number Description
US202A POWER DISTRIBUTION SWITCHES
US206 POWER DISTRIBUTION SWITCH
US2075A DUAL-CHANNEL POWER DISTRIBUTION CONTROL SWITCH
US211 HIGH-SIDE POWER SWITCHES
US211A HIGH-SIDE POWER SWITCHES

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD US2652SQ Preliminary LOW COST POWER-SAVING MODE PWM CONTROLLER FOR FLYBACK CONVERTERS  DESCRIPTION The UTC US2652SQ provides a CCM/valley switching mixed mode operation for better efficiency performance. The operation mode stays at CCM at heavy load, and switch to valley switching at light load. The UTC US2652SQ is a high performance current mode PWM controller ideally suited for low standby power. Drain-start up cell is design to minimize the standby power to minimize the standby power. At no load condition, the IC operates in power-saving mode for lower standby power, decreasing frequency for Higher conversion efficiency at light load condition.