Datasheet4U Logo Datasheet4U.com

UVXS0102 - 2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR

General Description

The UTC UVXS0102 is a two-bit non-inverting bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems.

Key Features

  • S.
  • Maximum Data Rates 24 Mbps (Push Pull) 2 Mbps (Open Drain).
  • 1.65V~3.6V on A ports and 2.3V~5.5V on B ports (VCCA≤VCCB).
  • No Direction-Control Signal Needed.
  • VCC Isolation Feature: If either VCC input is at GND, both ports are in the High-Impedance state.
  • No Power-Supply Sequencing Required: Either VCCA or VCCB can be ramped first.
  • Ioff Supports Partial-Power-Down Mode Operation CMOS IC SOP-8 www. unisonic. com. tw Copyright © 2018 Unisonic Technologies Co. , Ltd 1.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD UVXS0102 Preliminary 2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS  DESCRIPTION The UTC UVXS0102 is a two-bit non-inverting bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. The UTC UVXS0102 separates A ports with B ports, and both ports are configurable power-supply rails, with the A ports supporting operating voltages from 1.65V to 3.6V, and the B ports supporting operating voltages from 2.3V to 5.5V. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8V, 2.5V, 3.3V, and 5V voltage nodes.