Datasheet4U Logo Datasheet4U.com

H654 - COMPLEMENTARY OUTPUT HALL EFFECT LATCH

General Description

The UTC H654 is integrated Hall sensors with complementary output drivers designed for electronic commutation of brushless DC Fan.

It composed of an on-chip Hall voltage generator, a differential amplifier, Schmitt trigger, an open-collector output on a single chip.

Key Features

  • Operate from 3.5V ~ 20V supply voltage.
  • On-chip Hall sensor with two different sensitivity and hysteresis settings.
  • High output sinking capability up to 300mA for driving large load.
  • Lower current change rate reduces the peak output voltages during switching.
  • Build-in protecting diode for chip reversal power connecting. (Note1) 1 SIP-4.
  • Pb-free plating product number: H654L.

📥 Download Datasheet

Full PDF Text Transcription for H654 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for H654. For precise diagrams, and layout, please refer to the original PDF.

UNISONIC TECHNOLOGIES CO., LTD H654 LINEAR INTEGRATED CIRCUIT COMPLEMENTARY OUTPUT HALL EFFECT LATCH DESCRIPTION The UTC H654 is integrated Hall sensors with complementar...

View more extracted text
DESCRIPTION The UTC H654 is integrated Hall sensors with complementary output drivers designed for electronic commutation of brushless DC Fan. It composed of an on-chip Hall voltage generator, a differential amplifier, Schmitt trigger, an open-collector output on a single chip. Furthermore, an internal bandgap regulator allows temperature compensated operations and a wide operating supply range. An on-chip protection diode is implemented to prevent reverse power fault. When the magnetic flux density larger than threshold BOP, DO will be turned on(low) and DOB be turned off(high).

More Datasheets from Unisonic Technologies

Part Number Description