Datasheet4U Logo Datasheet4U.com

U74CBTLV3125 - LOW-VOLTAGE QUADRUPLE FET BUS SWITCH

General Description

The U74CBTLV3125 quadruple FET bus switch

Key Features

  • S.
  • 5-Ω Switch Connection Between Two Ports.
  • Standard ‘125-Type Pinout.
  • Isolation Under Power-Off Conditions.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
U74CBTLV3245 LOW-VOLTAGE OCTAL FET BUS SWITCH UTC
U74CBTLV3251 LOW-VOLTAGE 1-OF-8 FET MULTIPLEXER/DEMULTIPLEXER UTC
U74CBTLV3253 LOW-VOLTAGE DUAL 1-OF-4 FET MULTIPLEXER/DEMULTIPLEXER UTC
U74CBTLV3257 LOW-VOLTAGE DUAL 4-BIT 1-OF-2 FET MULTIPLEXER/DEMULTIPLEXER UTC
U74CBT3251C 1-OF-8 FET MULTIPLEXER/DEMULTIPLEXER UTC

Other Datasheets by Unisonic Technologies

Part Number Description
U74CBTLV3126 LOW-VOLTAGE QUADRUPLE FET BUS SWITCH
U74CBT1G125 SINGLE FET BUS SWITCH
U74CBT1G384 SINGLE FET BUS SWITCH
U74CBT1G385 SINGLE FET BUS SWITCH
U74CBT2G125 Dual Bus Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD U74CBTLV3125 LOW-VOLTAGE QUADRUPLE FET BUS SWITCH CMOS IC  DESCRIPTION The U74CBTLV3125 quadruple FET bus switch features independent line switches. Each switch is disabled when the associated output-enable ( OE ) input is high. The device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.