Datasheet4U Logo Datasheet4U.com

ULV1546 - 20V HIGH CURRENT DRIVE RAIL-TO-RAIL VCOM/GAMMA BUFFER

General Description

The UTC ULV1546 is the quadruple high voltage rail-to-rail Vcom/Gamma Buffer with low power dissipation.

Operating on power supplies ranging from 5V to 20V, while current consuming is less than 1.2mA / per amplifier.

Key Features

  • Wide Supply Operation Range +5V~+20V.
  • Beyond the rails input capability.
  • Rail-to-rail output swing.
  • Low supply current, 1.2mA per amplifier (typical).
  • Wide bandwidth (unit gain) 30MHz-3dB bandwidth.
  • 300mA peak output AC current (typ. ).
  • High slew rate=30V/µs.
  • Unity-gain stable.

📥 Download Datasheet

Full PDF Text Transcription for ULV1546 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for ULV1546. For precise diagrams, and layout, please refer to the original PDF.

UNISONIC TECHNOLOGIES CO., LTD ULV1546 Preliminary 20V HIGH CURRENT DRIVE RAIL-TO-RAIL VCOM/GAMMA BUFFER CMOS IC  DESCRIPTION The UTC ULV1546 is the quadruple high volta...

View more extracted text
FFER CMOS IC  DESCRIPTION The UTC ULV1546 is the quadruple high voltage rail-to-rail Vcom/Gamma Buffer with low power dissipation. Operating on power supplies ranging from 5V to 20V, while current consuming is less than 1.2mA / per amplifier. Rail-to-rail output capability and common mode input ability beyond the rails enable these amplifiers to offer maximum dynamic range at any supply voltage. Fast slew rate and settling times, and a high output drive capability of 300mA peak AC current (sink and source) are also provided by UTC ULV1546.

More Datasheets from Unisonic Technologies

Part Number Description