Datasheet4U Logo Datasheet4U.com

UC3717A - Stepper Motor Drive Circuit

Description

The UC3717A is an improved version of the UC3717, used to switch drive the current in one winding of a bipolar stepper motor.

Features

  • Full-Step, Half-Step and Micro-Step Capability.
  • Bipolar Output Current up to 1A.
  • Wide Range of Motor Supply Voltage 10-46V.
  • Low Saturation Voltage with Integrated Bootstrap.
  • Built-In Fast Recovery Commutating Diodes.
  • Current Levels Selected in Steps or Varied Continuously.
  • Thermal Protection with Soft Intervention.

📥 Download Datasheet

Datasheet preview – UC3717A

Datasheet Details

Part number UC3717A
Manufacturer Unitrode
File Size 636.28 KB
Description Stepper Motor Drive Circuit
Datasheet download datasheet UC3717A Datasheet
Additional preview pages of the UC3717A datasheet.

📁 Similar Datasheet

  • UC3714 - Complementary Switch FET Drivers (ETC)
  • UC3715 - Complementary Switch FET Drivers (ETC)
  • UC3705 - HIGH SPEED POWER DRIVER (Texas Instruments)
  • UC3706 - Dual Output Driver (Texas Instruments)
  • UC3707 - DUAL CHANNEL POWER DRIVER (Texas Instruments)
  • UC3708 - DUAL NON-INVERTING POWER DRIVER (Texas Instruments)
  • UC3709 - DUAL HIGH- SPEED FET DRIVER (Texas Instruments)
  • UC3001 - Printed Circuit Mount (Young)
  • UC32061 - SYNCHRONOUS STEP-DOWN DC/DC CONVERTER (UTC)
  • UC32062 - SYNCHRONOUS STEP-DOWN DC/DC CONVERTER (UTC)
Other Datasheets by Unitrode
  • UC3717 - Stepper Motor Drive Circuit
  • UC3710 - High Current FET Driver
  • UC3711 - Dual Ultra High-Speed FET Driver
  • UC3702 - Quad PWM Relay Driver
  • UC3704 - Bridge Transducer Switch
  • UC3705 - High Speed Power Driver
  • UC3706 - Dual Output Driver
  • UC3707 - Dual Channel Power Driver

Full PDF Text Transcription

Click to expand full text
UC3717A Stepper Motor Drive Circuit FEATURES • Full-Step, Half-Step and Micro-Step Capability • Bipolar Output Current up to 1A • Wide Range of Motor Supply Voltage 10-46V • Low Saturation Voltage with Integrated Bootstrap • Built-In Fast Recovery Commutating Diodes • Current Levels Selected in Steps or Varied Continuously • Thermal Protection with Soft Intervention DESCRIPTION The UC3717A is an improved version of the UC3717, used to switch drive the current in one winding of a bipolar stepper motor. The UC3717A has been modified to supply higher winding current, more reliable thermal protection, and improved efficiency by providing integrated bootstrap circuitry to lower recirculation saturation voltages. The diagram shown below presents the building blocks of the UC3717A.
Published: |