www.DataSheet4U.com
Ceramic Chip Capacitors
Multilayer chip capacitors have a low residual inductance, an excellent frequency
response and minimal stray capacitance since there are no leads. These characteristics
enable design to be very close to the theoretical values of the capacitors.
NP0/C0G: SPECIFICATIONS:
Typical Capacitance Change vs. Temperature
15%
10%
5%
0%
-5%
-10%
-15%
-55°C -25°C 0°C
25°C 50°C 75°C 100°C 125°C
OPERATING TEMPERATURE RANGE: -55°C to +125°C
TEMPERATURE COEFFICIENT:
0 ±30PPM/°C
TEMPERATURE VOLTAGE COEFFICIENT: 0 ±30PPM/°C
DISSIPATION FACTOR:
0.1% MAX.
INSULATION RESISTANCE:
>1000 ohms F or 100 G ohms, whichever is less at 25°C, VDCW.
(The IR at 125°C is 10% of the value at 25°C)
AGEING:
None
WITHSTANDING VOLTAGE:
>2.5 times VDCW
TEST PARAMETERS:
1MHz ± 100KHz at 1.0 ± 0.2 Vrms ≤ 100 pF, 25°C
1KHz ± 100Hz at 1.0 ± 0.2 Vrms > 100 pF, 25°C
CAPACITANCE TOLERANCE:
B,C,D,F,G,J,K
X7R: SPECIFICATIONS:
Typical Capacitance Change vs. Temperature
15%
10%
5%
0%
-5%
-10%
-15%
-55°C -25°C 0°C
25°C 50°C 75°C 100°C 125°C
OPERATING TEMPERATURE RANGE:
TEMPERATURE COEFFICIENT:
TEMPERATURE VOLTAGE COEFFICIENT:
DISSIPATION FACTOR:
INSULATION RESISTANCE:
AGEING:
WITHSTANDING VOLTAGE:
TEST PARAMETERS:*
CAPACITANCE TOLERANCE:
-55°C to +125°C
0 ±15%∆°C MAX.
X7R not applicable
For 50 volts and 100 volts: 2.5% MAX.;
For 25 volts: 3.0% MAX.; For 16 volts: 3.5% MAX.;
For 10 volts: 5.0% MAX.; For 6.3 volts: 10% MAX.
For values > 10µF and voltages ≤ 10V, the D.F. is 10% MAX.
>1000 ohms F or 100 G ohms, whichever is less at 25°C, VDCW.
(The IR at 125°C is 10% of the value at 25°C)
2.5% per decade hour, typical
>2.5 times VDCW
1KHz ± 100Hz at 1.0 ± 0.2 Vrms > 100 pF, 25°C
J,K,M
X5R: SPECIFICATIONS: OPERATING TEMPERATURE RANGE:
www.DataSheet4U.comTEMPERATURE COEFFICIENT:
-55°C to +85°C
0 ±15%∆°C MAX.
Typical Capacitance Change vs. Temperature
15%
TEMPERATURE VOLTAGE COEFFICIENT: X5R not applicable
DISSIPATION FACTOR:
For 50 volts and 100 volts: 2.5% MAX.;
10% For 25 volts: 3.0% MAX.; For 16 volts: 3.5% MAX.;
5% For 10 volts: 5.0% MAX.; For 6.3 volts: 10% MAX.
0% For values > 10µF and voltages ≤ 10V, the D.F. is 10% MAX.
-5%
INSULATION RESISTANCE:
>1000 ohms F or 100 G ohms, whichever is less
at 25°C, VDCW. (10,000 ohms at 125°C)
-10%
AGEING:
2.5% per decade hour, typical
-15%
-55°C -25°C 0°C 25°C 50°C 75°C 100°C 125°C
WITHSTANDING VOLTAGE:
>2.5 times VDCW
TEST PARAMETERS:*
CAPACITANCE TOLERANCE:
1KHZ ± 100Hz at 1.0 ± 0.2 Vrms > 100 pF, 25°C
J,K,M
Z5U: SPECIFICATIONS: OPERATING TEMPERATURE RANGE:
Typical Capacitance Change vs. Temperature
20%
TEMPERATURE COEFFICIENT:
DISSIPATION FACTOR:
0% INSULATION RESISTANCE:
AGEING:
-20%
WITHSTANDING VOLTAGE:
-40% TEST PARAMETERS:
-60% CAPACITANCE TOLERANCE:
+10°C to +85°C
+22% - 56%∆°C MAX.
4.0% MAX.
>100 ohms F or 10 G ohms, whichever is less at 25°C, VDCW.
5% per decade hour, typical
>2.5 times VDCW
1KHz ± 100Hz at 0.5 ± 0.1 Vrms, 25°C
M,Z,P
-80%
-55°C -25°C 0°C 25°C 50°C 75°C 100°C 125°C
Y5V: SPECIFICATIONS: OPERATING TEMPERATURE RANGE:
Typical Capacitance Change vs. Temperature
40%
TEMPERATURE COEFFICIENT:
DISSIPATION FACTOR:
20%
0%
-20%
-40%
-60%
-80%
-100%
-55°C -25°C
0°C
25°C 50°C 75°C 100°C 125°C
INSULATION RESISTANCE:
AGEING:
WITHSTANDING VOLTAGE:
TEST PARAMETERS:*
CAPACITANCE TOLERANCE:
-30°C to +85°C
+22% - 82%∆°C MAX.
For 25 volts and 50 volts: 5% MAX.;
For 16 volts: 7% MAX.; For 10 volts: 9% MAX.;
For 6.3 volts: 11% MAX.
For higher Cap values > 10µF, the D.F. is 20% MAX.
>100 ohms F or 10 G ohms, whichever is less at 25°C, VDCW.
7% per decade hour, typical
>2.5 times VDCW
1KHz ± 100Hz at 1.0 ± 0.2 Vrms, 25°C
M,Z
* Test parameters for Hi-Caps: X7R, X5R and Y5V
1KHz ± 100Hz at 1.0 ± 0.2 Vrms ≤ 10uF (10 V min.)
1KHz ± 100Hz at 0.5 ± 0.1 Vrms ≤ 10uF (6.3V max.)
120Hz ± 24Hz at 0.5 ± 0.1 Vrms > 10uF
6
All components in this section are RoHS compliant per the EU directives and definitions.
www.DataSheet4U.com
![[partsNo] view html](https://d4u-datasheet.netdna-ssl.com/img/html.jpg "[partsNo] view html"){kind=small}
