DCM5614VD0H36K3T02 Datasheet | Vicor

Features & Benefits - Isolated, regulated DC-DC converter - Up to 1300W, 46.43A continuous - 96% peak efficiency - 451W/in3 power density - Wide input range 180 - 400VDC - Safety Extra Low Voltage (SELV) 28V nominal output - 2121VDC isolation - ZVS, ZCS high-frequency switching - Enables low-profile, high-density filtering - OV, OC, UV, short circuit and thermal protection - Fully operational current limit - Available in chassis-mount and through-hole VIA package - 5.57 x 1.40 x 0.37in [141.43 x 35.54 x 9.40mm] - PMBus® management or analog control interface Typical Applications - Defense - Aerospace - munications Systems Product Ratings VIN = 270V (180 - 400V) VOUT = 28V (22 - 36V) (NO LOAD) POUT = 1300W IOUT = 46.43A Product Description The DCM in a VIA package (270 - 28V) is a high-power, high‑efficiency DC-DC converter, operating from a 180 - 400VDC primary source to deliver an isolated, regulated, 28V nominal, Safety Extra Low Voltage (SELV) secondary output. This low‑profile module, available in chassis- or PCB-mount form-factors, incorporates a DC-DC converter, inrush protection and optional analog or digital munication. The DCM offers low noise, fast transient response and high efficiency and power density. The optional secondary referenced PMBus-patible telemetry and control interface provides access to the DCM’s internal controller configuration, fault monitoring and other telemetry functions. Leveraging the thermal management and power benefits of VIA packaging technology, the DCM module offers flexible mechanical mounting options with low top- and bottom-side thermal resistances. When bined with downstream regulators and Po L current multipliers, the DCM enables power system architects to achieve power-system solutions with outstanding performance metrics and low total cost. Size: 5.57 x 1.40 x 0.37in [141.43 x 35.54 x 9.40mm] DCM™ in a VIA™ Package Page 1 of 41 Rev 1.2 08/2020 Note: Product images may not highlight current product...