M-FIAM3HS1 Datasheet | Vicor Corporation

Features - - - - - - - - EMI filtering-MIL-STD-461E Transient protection-MIL-STD-704E Environments-MIL-STD-810, MIL-STD-202 Environmental stress screening Low profile mounting options Output current up to 3 Amps Mini sized package Inrush current limiting M-FIAM3 Military 270Vin Filter Input Attenuator Module Shown actual size: 2.28 x 2.2 x 0.5 in 57,9 x 55,9 x 12,7 mm Product Highlights The M-FIAM3 is a DC front-end module that provides EMI filtering and transient protection required in military applications. The M-FIAM3 enables designers using Vicor 2nd Generation 300V DC-DC converters to meet conducted emission/conducted susceptibility per MIL-STD-461E; and input transients per MIL-STD-704E. The M-FIAM3 accepts an input voltage of 180-375Vdc and delivers output current up to 3 Amps. M-FIAM3 is housed in an industry standard "half brick" module measuring 2.28" x 2.2" x 0.5" and depending upon model selected, may be mounted on-board or in-board for height critical applications. Absolute Maximum Rating Parameter +In to - In +In to - In Mounting torque Pin Soldering temperature Pin Soldering temperature Operating temperature H- Grade Storage temperature H- Grade Operating temperature M- Grade Storage temperature M- Grade Rating Unit 375 Vdc 400 Vdc 5 (0.57) in-lbs 500 (260) °F (°C) 750 (390) °F (°C) -40 to +100 °C -55 to +125 °C -55 to +100 °C -65 to +125 °C Notes Continuous 100ms 6 each, #4-40 or M3 <5 sec; wave solder <7 sec; hand solder Baseplate Baseplate Specifications (typical at TBP = 25ºC, nominal line, 75% load, unless otherwise specified) patible Products - 2nd Generation 300V Input DC-DC converters Part Number Format Parameter Input voltage Output current Inrush limiting Transient immunity EMI:MIL-STD-461E Conducted emissions: Conducted susceptibility: Dielectric withstand Min 180Vdc Typ 270Vdc Max Remarks 375Vdc Continuous 3A 0.018A/µF Exceeds limits of MIL-STD-704E M-FIAM3 M Product Product Grade(°C) H = - 40 to +100 M = - 55 to +100 Pin...