900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Vishay Intertechnology Electronic Components Datasheet

25TTS08S Datasheet

Surface Mountable Phase Control SCR

No Preview Available !

25TTS...S High Voltage Series
Vishay High Power Products
Surface Mountable Phase
Control SCR, 16 A
Anode
2
D2PAK
13
Cathode Gate
PRODUCT SUMMARY
VT at 16 A
ITSM
VRRM
< 1.25 V
300 A
800 to 1600 V
DESCRIPTION/FEATURES
The 25TTS...S High Voltage Series of silicon controlled
rectifiers are specifically designed for medium power
switching and phase control applications. The glass
passivation technology used has reliable operation up to
125 °C junction temperature.
Typical applications are in input rectification (soft start) and
these products are designed to be used with Vishay HPP
input diodes, switches and output rectifiers which are
available in identical package outlines.
This product has been designed and qualified for industrial
level.
OUTPUT CURRENT IN TYPICAL APPLICATIONS
APPLICATIONS
SINGLE-PHASE BRIDGE
NEMA FR-4 or G10 glass fabric-based epoxy
3.5
with 4 oz. (140 µm) copper
Aluminum IMS, RthCA = 15 °C/W
Aluminum IMS with heatsink, RthCA = 5 °C/W
Note
• TA = 55 °C, TJ = 125 °C, footprint 300 mm2
8.5
16.5
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER
TEST CONDITIONS
IT(AV)
IRMS
VRRM/VDRM
ITSM
VT
dV/dt
Sinusoidal waveform
16 A, TJ = 25 °C
dI/dt
TJ
THREE-PHASE BRIDGE
5.5
13.5
25.0
VALUES
16
25
800 to 1600
300
1.25
500
150
- 40 to 125
UNITS
A
UNITS
A
V
A
V
V/µs
A/µs
°C
VOLTAGE RATINGS
PART NUMBER
25TTS08S
25TTS12S
25TTS16S
VRRM, MAXIMUM PEAK
REVERSE VOLTAGE
V
800
1200
1600
VDRM, MAXIMUM PEAK
DIRECT VOLTAGE
V
800
1200
1600
IRRM/IDRM,
AT 125 °C
mA
10
Document Number: 93704
Revision: 20-Jun-08
For technical questions, contact: diodes-tech@vishay.com
www.vishay.com
1


Vishay Intertechnology Electronic Components Datasheet

25TTS08S Datasheet

Surface Mountable Phase Control SCR

No Preview Available !

25TTS...S High Voltage Series
Vishay High Power Products Surface Mountable Phase
Control SCR, 16 A
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
Maximum average on-state current
Maximum RMS on-state current
Maximum peak, one-cycle,
non-repetitive surge current
IT(AV)
IRMS
ITSM
Maximum I2t for fusing
I2t
Maximum I2t for fusing
Maximum on-state voltage drop
On-state slope resistance
Threshold voltage
Maximum reverse and direct leakage current
I2t
VTM
rt
VT(TO)
IRM/IDM
Holding current
Maximum latching current
Maximum rate of rise of off-state voltage
Maximum rate of rise of turned-on current
IH
IL
dV/dt
dI/dt
TEST CONDITIONS
TC = 93 °C, 180° conduction half sine wave
10 ms sine pulse, rated VRRM applied
10 ms sine pulse, no voltage reapplied
10 ms sine pulse, rated VRRM applied
10 ms sine pulse, no voltage reapplied
t = 0.1 to 10 ms, no voltage reapplied
16 A, TJ = 25 °C
TJ = 125 °C
TJ = 25 °C
TJ = 125 °C
25TTS08, 25TTS12
25TTS16
VR = Rated VRRM/VDRM
Anode supply = 6 V,
resistive load, initial IT = 1 A
Anode supply = 6 V, resistive load
VALUES
UNITS
TYP. MAX.
16
25
A
300
350
450
A2s
630
6300
A2s
1.25
V
12.0
mΩ
1.0
V
0.5
10
- 100 mA
100 150
200
500
V/µs
150
A/µs
TRIGGERING
PARAMETER
Maximum peak gate power
Maximum average gate power
Maximum peak positive gate current
Maximum peak negative gate voltage
SYMBOL
PGM
PG(AV)
+ IGM
- VGM
Maximum required DC gate current to trigger
IGT
Maximum required DC gate voltage
to trigger
VGT
Maximum DC gate voltage not to trigger
VGD
Maximum DC gate current not to trigger
IGD
TEST CONDITIONS
Anode supply = 6 V, resistive load, TJ = - 10 °C
Anode supply = 6 V, resistive load, TJ = 25 °C
Anode supply = 6 V, resistive load, TJ = 125 °C
Anode supply = 6 V, resistive load, TJ = - 10 °C
Anode supply = 6 V, resistive load, TJ = 25 °C
Anode supply = 6 V, resistive load, TJ = 125 °C
TJ = 125 °C, VDRM = Rated value
VALUES
8.0
2.0
1.5
10
60
45
20
2.5
2.0
1.0
0.25
2.0
UNITS
W
A
V
mA
V
mA
SWITCHING
PARAMETER
Typical turn-on time
Typical reverse recovery time
Typical turn-off time
SYMBOL
tgt
trr
tq
TJ = 25 °C
TJ = 125 °C
TEST CONDITIONS
VALUES
0.9
4
110
UNITS
µs
www.vishay.com
2
For technical questions, contact: diodes-tech@vishay.com
Document Number: 93704
Revision: 20-Jun-08



Part Number 25TTS08S
Description Surface Mountable Phase Control SCR
Maker Vishay
Total Page 3 Pages
PDF Download

25TTS08S Datasheet PDF





Similar Datasheet

1 25TTS08 Phase Control SCR
Vishay
2 25TTS08 Thyristor
INCHANGE
3 25TTS08FP PHASECONTROLSCRTO-220FULLPAK
InternationalRectifier
4 25TTS08FP Phase Control SCR
Vishay
5 25TTS08S SURFACEMOUNTABLEPHASECONTROLSCR
InternationalRectifier
6 25TTS08S Surface Mountable Phase Control SCR
Vishay





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy