www.vishay.com
E/H (Military M/D55342)
Vishay Dale Thin Film
QPL MIL-PRF-55342 Qualified
Thin Film Resistor, Surface Mount Chip
Thin Film Mil chip resistors feature all sputtered wraparound
termination for excellent adhesion and dimensional
uniformity. They are ideal in applications requiring stringent
performance requirements. Established reliability is assured
through 100 % screening and extensive environmental lot
testing.
CONSTRUCTION
Passivation
Resistor Film
Solder
Coating
Nickel Barrier
High Purity
Alumina Substrate
Adhesion Layer
FEATURES
• Established reliability, “S” and “V” failure rate level
(10 ppm), C = 2
• High purity alumina substrate
• Wraparound termination featuring a tenacious adhesion
layer covered with an electroplated nickel barrier layer for
+150 °C operating conditions
• Very low noise and voltage coefficient
(< -25 dB, 0.5 ppm/V)
• Non-inductive
• Laser-trimmed tolerances ± 0.1 %
• Wraparound resistance less than 0.010 typical
• In-lot tracking less than 5 ppm/°C
• Complete MIL-testing available in-house
• Antistatic waffle pack or tape and reel packaging available
• Military / aerospace / QPL
TYPICAL PERFORMANCE
TCR
TOL.
ABSOLUTE
25
0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
Material
Tamelox resistor film (passivated nichrome)
Resistance Range
10 to 6.19 M
TCR: Absolute
± 25 ppm/°C to ± 300 ppm/°C
Tolerance: Absolute
± 0.1 % to ± 10 %
Stability: Absolute
R ± 0.02 %
Stability: Ratio
-
Voltage Coefficient
0.1 ppm/V
Working Voltage
30 V to 200 V
Operating Temperature Range
-55 °C to +150 °C
Storage Temperature Range
-55 °C to +150 °C
Noise
Shelf Life Stability: Absolute
< - 25 dB
R ± 0.01 %
CONDITIONS
-
-
-55 °C to +125 °C
+25 °C
2000 h at +70 °C
-
-
-
-
-
-
1 year at +25 °C
COMPONENT RATINGS
CASE SIZE
POWER
RATING
(mW)
WORKING
RESISTANCE RANGE () BY CHARACTERISTICS TOLERANCE
VOLTAGE
E
E
H, K, L, M
H, K, L, M
(V) (0.1 %, 0.25 %, 0.5 %) (1 %, 2 %, 5 %) (0.1 %, 0.25 %, 0.5 %) (1 %, 2 %, 5 %)
M55342/01
50
40
49.9 to 150K
49.9 to 150K
20 to 150K
20 to 150K
M55342/02
125
40
49.9 to 301K
49.9 to 301K
20 to 301K
20 to 301K
M55342/03
200
75
49.9 to 649K
49.9 to 649K
10 to 649K
10 to 649K
M55342/04
150
125
49.9 to 1.69M
49.9 to 1.69M
10 to 1.69M
10 to 1.69M
M55342/05
225
175
49.9 to 3.16M
49.9 to 3.16M
10 to 3.16M
10 to 3.16M
M55342/06
150
50
49.9 to 475K
49.9 to 475K
10 to 475K
10 to 475K
D55342/07
250
100
49.9 to 1.5M
49.9 to 1.5M
10 to 1.5M
10 to 1.5M
M55342/08
800
150
49.9 to 4.02M
49.9 to 4.02M
10 to 4.02M
10 to 4.02M
M55342/09
1000
200
49.9 to 6.19M
49.9 to 6.19M
10 to 6.19M
10 to 6.19M
M55342/10
500
75
49.9 to 1M
49.9 to 1M
49.9 to 1M
49.9 to 1M
M55342/11
50
30
49.9 to 100K
49.9 to 100K
20 to 100K
20 to 100K
M55342/12
100
50
49.9 to 258K
49.9 to 261K
10 to 258K
10 to 261K
Note
• Values listed are a guide, refer to MIL spec for value/tolerance allowance
Revision: 15-Jul-16
1 Document Number: 60018
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
