DG467 - High Voltage SPST Analog Switches

Vishay

General Description

The DG467 and DG468 are dual supply single-pole/singlethrow (SPST) switches.

On resistance is 10  max.

and flatness is 2  max.

Key Features

± 15 V Analog Signal Range.
On-Resistance - RDS(on): 10  max.
Fast Switching Action - TON: 100 ns.
VL Logic Supply Not Required.
TTL CMOS Input Compatible.
Rail To Rail Signal Handling.
Dual Or Single Supply Operation.
Material categorization: For definitions of compliance please see www. vishay. com/doc?99912.

📥 Download Datasheet

DG467 high voltage spst analog switches by Vishay - Datasheet Preview

Datasheet Details

Part number	DG467
Manufacturer	Vishay
File Size	182.16 KB
Description	High Voltage SPST Analog Switches
Datasheet	DG467 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
DG4000	Function/Arbitrary Waveform Generator Guide Manual	RIGOL
DG401	Monolithic CMOS Analog Switches	Intersil Corporation
DG401	Improved / Dual / High-Speed Analog Switches	Maxim
DG402	Low Power High SPeed CMOS Analog Switch	ETC
DG403	Improved / Dual / High-Speed Analog Switches	Maxim Integrated

Other Datasheets by Vishay

Part Number	Description
DG468	High Voltage SPST Analog Switches
DG401	High-Speed CMOS Analog Switches
DG401B	CMOS Analog Switches
DG402B	CMOS Analog Switches
DG403	High-Speed CMOS Analog Switches

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

DG467, DG468 Vishay Siliconix Low Power, High Voltage SPST Analog Switches DESCRIPTION The DG467 and DG468 are dual supply single-pole/singlethrow (SPST) switches. On resistance is 10  max. and flatness is 2  max. over the specified analog signal range. These analog switches were designed to provide high speed, low error switching of precision analog signals. The primary application areas are in the routing and switching in telecommunications and test equipment. Combining low power, low leakages, low on-resistance and small physical size, the DG467/468 are also ideally suited for portable and battery powered industrial and military equipment. The DG467 has one normally closed switch, while the DG468 switch is normally open.