LVB14A Datasheet | Vishay

New Product Vishay General Semiconductor Low VF Surface Mount Transient Voltage Suppressors Features - Uni-directional polarity only - Peak pulse power: 600 W (10/1000 µs) - Ideal for automated placement - Low forward voltage - Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C - Solder dip 260 °C, 40 s DO-214AA (SMB J-Bend) - ponent in accordance to Ro HS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs sensor units specifically for protecting 12 V supplied sensitive equipment against transient overvoltages. MECHANICAL DATA Case: DO-214AA (SMBJ) Molding pound meets UL 94 V-0 flammability rating Base P/N-E3 - Ro HS pliant, mercial grade Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix meets JESD 201 class 1A whisker test Polarity: Color band denotes cathode end PRIMARY CHARACTERISTICS VBR IPPM with 10 x 1000 µs IPPM with 1.4 x 6.5 µs VF at IF = 1.0 A IFSM TJ max. 13.2 - 14.8 V 31 A 17.5 A 0.35 V 100 A 150 °C .Data Sheet.co.kr MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Device marking code Peak power pulse current with a 10/1000 µs waveform (Fig. 1) (1)(2) Peak pulse current with a 1.4/6.5 µs waveform (Fig. 2) Peak forward surge current 8.3 ms single half sine-wave (2) Power dissipation on infinite heatsink, TL = 50 °C Operating junction and storage temperature range Notes: (1) Non-repetitive current pulse, per Fig. 1 and derated above TA = 25 °C per Fig. 1 (2) Mounted on P.C.B. with 5.0 x 5.0 mm copper pads attached to each terminal IPPM IPPM IFSM PD TJ, TSTG SYMBOL VALUE L14 31 17.5 100 5 - 65 to + 150 A A A W °C UNIT Document Number: 88483 Revision: 20-Oct-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay., PDD-Asia@vishay., PDD-Europe@vishay. .vishay. 1 Datasheet pdf -...