MCT6
MCT6 is Optocoupler manufactured by Vishay.
DESCRIPTION
The MCT6 is a two channel optocoupler for high density applications. Each channel consists of an optically coupled pair with a gallium arsenide infrared LED and a silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the device while maintaining a high degree of electrical isolation between input and output.
The MCT6 is especially designed for driving medium-speed logic, where it may be used to eliminate troublesome ground loop and noise problems. It can also be used to replace relays and transformers in many digital interface applications, as well as analog applications such as CRT modulation.
FEATURES
- Current transfer ratio, 50 % typical
- Leakage current, 1.0 n A typical
- Two isolated channels per package
- Material categorization: for definitions of pliance please see .vishay./doc?99912
AGENCY APPROVALS
- UL1577, file no. E52744 system code H, double protection
- c UL tested to CSA 22.2 bulletin 5A
- DIN EN 60747-5-5 (VDE 0884-5), available with option 1
- CSA 93751
- BSI EN 60950, BSI EN 60065
ORDERING INFORMATION
- X
#
PART NUMBER
PACKAGE OPTION
TAPE AND REEL
7.62 mm Option 7
Option 9
AGENCY CERTIFIED/PACKAGE UL, CSA, BSI DIP-8 SMD-8, option 7 SMD-8, option 9 VDE, UL, CSA, BSI DIP-8
Notes
- Additional options may be possible, please contact sales office (1) Also available in tubes, do not put “T” on the end
CTR ≥ 20 MCT6 MCT6-X007T (1) MCT6-X009T (1) ≥ 20 MCT6-X001
> 0.7 mm
> 0.1 mm
Rev. 1.7, 11-Jan-2024
Document Number: 83645
For technical questions, contact: optocoupleranswers@vishay.
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT .vishay./doc?91000...
