900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Vishay Intertechnology Electronic Components Datasheet

NTCAIMME3C90042 Datasheet

Steel Capped Sensors

No Preview Available !

www.vishay.com
NTCAIMME3C90042
Vishay BCcomponents
NTC Thermistors, Steel Capped Sensors
QUICK REFERENCE DATA
PARAMETER
Resistance value at 25 °C
VALUE
12K
UNIT
Tolerance on R25-value
B25/85-value
Tolerance on B25/85-value
Operating temperature range
at zero dissipation
± 4.0
3730
± 1.5
- 25 to + 110
%
K
%
°C
Resistance value at 0 °C
Resistance value at 85 °C
35 875 ± 7 %
1475 ± 3 %
Resistance value at 100 °C
963 ± 4.2 %
Maximum power dissipation at 55 °C
250
mW
Dissipation factor
in still air (for information only)
7.5 mW/K
in still water (for information only)
Thermal time constant in still air () (1)
Response time (1)
Temperature gradient (2)
18
285
13 to 16
0.02
s
K/K
Minimum dielectric withstanding
voltage between terminals and
capsule during
1 min
1500
VRMS
3 s 1650
Minimum insulation resistance
between terminals and capsule at
100 VDC
Climatic category (LCT/UCT/days)
Weight
100M
25/110/56
8
g
Notes
(1) The response time is the time necessary to change 63.2 % of the
total difference between the initial and the final body
temperature, when subjected to a step function change in
ambient temperature.
Step change:
a. Initial temperature: Air at 25 °C
b. Final temperature: Water at 100 °C
(2) The temperature gradient is the difference per degree Celsius
between the true temperature of the liquid (water) and the
temperature measured by the sensor.
METHOD OF APPLICATION
sensor
plate
water
FEATURES
• High mechanical strength
• FASTON connectors for easy connection
• Accuracy of ± 1 °C between 25 °C and 85 °C
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
APPLICATIONS
• Sensors for water temperature control in, for example:
- Washing machines
- Dish washers
- Heat pumps
- Electric boilers
DESCRIPTION
These thermistors have a negative temperature coefficient.
The device consists of a soldered ceramic chip which is
mounted in a capsule of stainless steel and provided with
two 6.3 mm tinned spade connectors.
The device is non-flammable and the housing is stainless
steel.
MOUNTING
Connect to two FASTONS 6.3 x 0.8 (0.25" x 0.032")
receptacle or equivalent and mounted with a watertight
sealing.
DESIGN-IN SUPPORT
R(T) table spreadsheet available on request at
nlr@vishay.com.
DIMENSIONS in millimeters
Component outline
17.5
+
2
0
30.5
-
0
0.5
4 ± 1 0.8
0.4 ± 0.1
4±1
6.3 ± 0.1
0
+
1
0
1.1 max. (1)
Ø
12.4
-
0
0.2
DERATING
P
(%)
100
Ø 9.8 ± 0.1 (1)
0
- 25 0
Tmax T peak
55 90 110 130
T (°C)
Power derating curve
Revision: 18-Aug-11
1 Document Number: 29066
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


Vishay Intertechnology Electronic Components Datasheet

NTCAIMME3C90042 Datasheet

Steel Capped Sensors

No Preview Available !

www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1 Document Number: 91000


Part Number NTCAIMME3C90042
Description Steel Capped Sensors
Maker Vishay
PDF Download

NTCAIMME3C90042 Datasheet PDF





Similar Datasheet

1 NTCAIMME3C90042 Steel Capped Sensors
Vishay





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy