Datasheet4U Logo Datasheet4U.com

NTCLE317E4103SBA Datasheet Ntc Thermistor

Manufacturer: Vishay

Overview: .vishay. NTCLE317E4103SBA Vishay BCponents NTC Thermistors, Long Insulated Leads 150 °C With Very Low Thermal Gradient LINKS TO ADDITIONAL RESOURCES Design Tools QUICK REFERENCE DATA PARAMETER Resistance value at 25 °C Tolerance on R25-value Temperature accuracy between 25 °C and 85 °C -55 °C and 150 °C B25/85-value Tolerance on B25/85-value Operating temperature range at zero dissipation Resistance value at 85 °C Maximum power dissipation at 55 °C Min. dielectric withstanding voltage (RMS) between leads and coating Dissipation factor  in still air (for information only) Response time (in oil) Weight VALUE 10K ± 2.19 ± 0.5 ± 1.0 3984 ± 0.5 -55 to +150 1066.1 50 100 0.8 0.3  0.05 UNIT  % °C K % °C  mW V mW/K s g DESIGN-IN SUPPORT Not intended for fluid immersed applications or continuous contact with water or conducting liquids. Can be potted in suitable resins. For plete curve putation, please visit: .vishay./thermistors/ntc-curve-list/. Consult Vishay for specific applications, mounting, alternative RT curves, or wire length.

General Description

These negative temperature coefficient thermistors consist of a mini-chip soldered between two AWG #32 PEEK insulated silver plated nickel / iron leads and coated with ocher colored epoxy lacquer.

High adhesive strength between PEEK wire and encapsulating lacquer.

PACKAGING The thermistors are packed in cardboard bo

Key Features

  • Long and flexible leads for special mounting or assembly requirements.
  • Best accuracy of ± 0.5 °C between 25 °C and 85 °C and ± 1.0 °C between -55 °C and 150 °C.
  • Electrical features of “accuracy line” sensors.
  • Mounting: radial insulated leads, low heat-conducting FeNi wires.
  • AEC-Q200 qualified.
  • Fast response time of 0.3 s with small 1.6 mm head Ø.
  • Material categorization: for definitions of compliance please see www. vishay. com/doc?99.

NTCLE317E4103SBA Distributor